Harbor Freight Tools 90003 operating instructions

Page 6

7.Always maintain a 1/16” distance or less between the Grinding Wheels (part #64) and Left and Right Tool Rests (parts #28, #32) as the diameter of the Grinding Wheels decrease with use.

8.To avoid accidental electrical shock, do not allow the Power Switch (part #3) to become wet. Do not touch the Power Switch with wet hands.

9.When using the Bench Grinder, always maintain a firm grip on the object being ground with both hands.

10.To avoid accidental burns use caution when handling an object that is being ground. Allow sufficient time for the object to completely cool before handling.

11.Always remove all adjusting keys and wrenches from the Bench Grinder before starting.

12.Do not pull or carry the Bench Grinder by its Power Cord (part #4), or pull the Cord around sharp corners or edges. Do not unplug the Bench Grinder by pulling on the Cord. Keep the Cord away from heated surfaces.

13.Do not force the tool. This Bench Grinder will do the work better and safer at the speed and capacity for which it is designed.

14.Keep fingers and hands as far away as possible from the rotating Grinding Wheels (part #64).

15.Check for damaged parts. Before using this product, carefully check that it will operate properly and perform its intended function. Check for damaged parts and any other conditions that may affect the safe operation of this product. Replace or repair damaged or worn parts immediately.

16.Replacement parts and accessories. When servicing, use only identical re- placement parts. Only use accessories intended for use with this product.

17.Use the right product for the right job. There are certain applications for which this product was designed. Do not use small equipment, tools, or attach- ments to do the work of larger industrial equipment, tools, or attachments. Do not use this product for a purpose for which it was not intended.

18.Stay alert. Watch what you are doing at all times. Use common sense. Do not use this product when you are tired or distracted from the job at hand.

19.Do not operate this product when fatigued or under the influence of alcohol or drugs.

SKU 90003

PAGE 6

Image 6
Contents Bench Grinder Work Area Product Specifications Save this ManualGeneral Safety Rules Read and Understand ALL InstructionsElectrical Safety Personal SafetyTool USE and Care Specific Safety Rules ServicePage Grounding Grounded Tools Tools with Three Prong PlugsFigure a Double Insulated Tools Tools with TWO Prong Plugs Extension Cords Figure CSymbology Assembly InstructionsUnpacking Figure D Figure F Figure G INSPECTION, MAINTENANCE, and Cleaning Operating InstructionsParts List Assembly Diagram Please Read the Following Carefully