Harbor Freight Tools 30304 Wrench #48 Grinding Wheel #45 Flange Nut #46 Wrench #49, #6 -- SKU

Page 6

Step 4: Thread the FLANGE NUT (#46) onto the ARBOR. Tighten by hand.

Step 5: Place the WRENCH (#48) onto the flats of the ARBOR. You may have to turn the ARBOR slightly to fit the WRENCH on.

Step 6: Insert the prongs of the WRENCH (#49) into the two holes in the FLANGE NUT as shown in Figure 3.

Wrench (#48)

Grinding Wheel (#45)

Flange Nut (#46)

Wrench (#49)

Figure 3 — Securing the Grinding Wheel

Page #6 -- SKU: 30304

Image 6

Contents AIR Angle Grinder Mission Oaks Blvd. / Camarillo, CAInstructions Before Using this Tool #2 -- SKU#3 -- SKU UnpackingAngle Grinder Assembly Handle #47 Assembly#4 -- SKU #5 -- SKU Attaching the Grinding WheelWrench #48 Grinding Wheel #45 Flange Nut #46 Wrench #49 #6 -- SKUWrench #48 Grinding Wheel #45 Wrench #49 #7 -- SKUOperation Angle Grinder #8 -- SKUMaintenance Throttle Lever #59 Throttle Lever Lock #61#9 -- SKU Air Inlet Throttle Lever #59 Throttle Lever Lock #61 #10 -- SKUParts List #11 -- SKUAssembly Diagram #12 -- SKU