Installing the Flashlight Base
The flashlight base will give you the extra light that you need in low light situations.
To install the flashlight base:
1.Unplug the tool from power!
2.Remove the collet shield.
3.Screw the flashlight base onto the mini grinder in place of the collet shield.
4.Turn the flashlight base ON/OFF with the small switch on the face of the flashlight base as shown in Figure 4.
Figure 4. Flashlight base.
Daily Maintenance
These items should be done after each use.
1.Wipe the motor housing and tool bits with a dry cloth or blow off dust and debris with compressed air.
2.Check for damage to bits, cords, or the housing.
Model H6156 Cordless Mini Grinder |