Additional Safety Instructions for
this Cordless Mini Grinder
1.READ THIS MANUAL. This man- ual contains proper operating instructions for this machine.
2.DO NOT jam the grinder against the workpiece. Firmly grasp the grinder and ease it against the workpiece using light pressure.
3.DO NOT wear loose clothing while operating this machine. Roll up or button sleeves at the cuff.
4.DO NOT place hands near, or in contact with, mini grinder during operation.
5.GRIP THE WORKPIECE FIRMLY.
6.NEVER leave the machine running unattended.
7.REPLACE grinding disks or sand- ing sleeves when worn.
8.NEVER work on more than one item at a time.
9.ALWAYS disconnect the machine from the power source before changing grinding disks, sanding sleeves, or tool bits
10.ALWAYS test run the machine before starting any work.
11.DO NOT use the flex shaft with a tight bend. This may cause binding and damage the inner spindle.
12.CLAMP THE WORKPIECE. DO NOT hold the workpiece with one hand and operate the mini grinder with the other.
13.DO NOT charge battery when the battery charger is on a flammable surface. There is a risk of fire.
14.KEEP BATTERIES AWAY FROM METAL OBJECTS to prevent ter- minals from shorting.
Operating this mini grinder can propel objects into the air, causing immedi- ate eye damage. To protect your- self, always wear American National Standards Institute (ANSI) approved safety glasses or goggles when oper- ating this equipment.
No list of safety guidelines can be complete. Every shop environment is different. Always consider safety first, as it applies to your individual working conditions. Use this and other machinery with caution and respect. Failure to do so could result in serious personal injury, damage to equipment or poor work results.
Model H6156 Cordless Mini Grinder |