Grizzly H7759 owner manual Inventory Assembly, H7758 Box Inventory Qty

Inventory &

Assembly

Use the list below and Figures 1 & 2 to inventory and assemble your grinder.

H7758 Box Inventory		Qty
A.	Grinder	1
B.	Eye Shields (DO NOT OVERTIGHTEN)....	2
C.	Support Arms	2
D.	Support Retainers	2
E.	Eyeshield Bracket Assemblies	2
F.	Tool Rests	2
G.	Hex Bolts M8-1.25 X 14	2
H.	Hex Bolts M8-1.25 X 10	2
I.	Hex Bolts M6-1 X 6	2
J.	Flat Washers 8mm	6
K.	Flat Washers 6mm	2
L.	Spark Deflectors	2
M.	Phillips Head Screws M4-.7 X 10	4
N.	Flat Washers 4mm	4
O.	Lock Washers 4mm	4
P.	Hex Nuts M4-.7	4

B		M, N, O, P
C		E
		L
		I, K
	D	F
		G, J
		H, J
		Figure 1. H7758 assembly.

In the event that any nonproprietary parts are missing (e.g. a nut or a washer), we would be glad to replace them, or for the sake of expedi- ency, replacements can be obtained at your local hardware store.

H7758/H7759 8" & 10" Bench Grinders

EYE SHIELDS are the first level of protec- tion from flying debris or sparks and MUST be installed before operating the grinder.

H7759 Box Inventory		Qty
A.	Grinder	1
B.	Eye Shields (DO NOT OVERTIGHTEN)....	2
C.	Support Arms	2
D.	Support Retainers	2
E.	Eyeshield Bracket Assemblies	2
F.	Tool Rests	2
G.	Hex Bolts M8-1.25 X 14	2
H.	Star Knobs M6-1 x 10	2
I.	Flat Washers 8mm	2
J.	*Spark Deflectors	2
K.	Phillips Head Screws M4-.7 X 10	4
L.	Flat Washers 4mm	4
M.	Lock Washers 4mm	4
N.	Hex Nuts M4-.7	4

*The Spark Deflectors (J) attach with the screw, hex nut, and washer that holds the wheel cover in place.

B	K, L, M, N
C	E
	J

D	F
	G, I
	H

Figure 2. H7759 assembly.

NOTICE Some hardware/fasteners in the inventory list may arrive pre-installed on the machine. Check these locations before assuming any items from the inventory list are missing.

-11-