H7759 Parts List
REF PART # | DESCRIPTION | |
|
|
|
1 | PS06M | PHLP HD SCR |
2 | PW02M | FLAT WASHER 5MM |
3 | PH7759003 | RUBBER FOOT |
4 | PH7759004 | BASE PLATE |
5 | PB07M | HEX BOLT |
6 | PLW04M | LOCK WASHER 8MM |
7 | PH7759007 | BASE |
8 | PS05M | PHLP HD SCR |
9 | PH7759009 | |
10 | PH7759010 | CORD CLIP FIXED PLATE |
11 | PS05M | PHLP HD SCR |
12 | PH7759012 | WIRE BUSHING |
13 | PH7759013 | POWER CORD |
14 | PS38M | PHLP HD SCR |
15 | PW05M | FLAT WASHER 4MM |
16 | PTLW01M | EXT TOOTH WASHER 4MM |
17 | PH7759017 | CORD CLIP |
18 | PH7759018 | OUTER WHEEL FLANGE |
19 | PH7759019 | WHEEL |
20 | PN28M | HEX NUT |
21 | PH7759021 | RIGHT WHEEL GUARD COVER |
22 | PS105M | PHLP HD SCR |
23 | PS47M | PHLP HD SCR |
24 | PLW03M | LOCK WASHER 6MM |
25 | PH7759025 | LEFT END CAP |
26 | PH7759026 | WAVE LOCK WASHER 52MM |
27 | P6205 | BEARING 6205 |
28 | PH7759028 | LOCK WASHER |
29 | PH7759029 | CENTRIFUGAL SWITCH |
30 | PH7759030 | STATOR |
31 | PH7759031 | ROTOR |
REF PART # | DESCRIPTION | |
|
|
|
32 | PH7759032 | RIGHT END CAP |
33 | PH7759033 | STAR KNOB |
34 | PH7759034 | RIGHT WORK REST |
35 | PN06M | HEX NUT |
36 | PH7759036 | RIGHT SAFE GUARD |
37 | PS11M | PHLP HD SCR |
38 | PH7759038 | EYESHIELD MOUNTING ROD |
39 | PH7759039 | EYESHIELD |
40 | PS09M | PHLP HD SCR |
41 | PH7759041 | SWITCH PLATE |
42 | PH7759042 | CAPACITOR HOLDER |
43 | PH7759043 | LEFT SAFE COVER |
44 | PN36M | HEX NUT |
45 | PH7759045 | WHEEL |
46 | PH7759046 | LEFT WHEEL GUARD |
47 | PH7759047 | LEFT WORK REST |
48 | PH7759048 | CAPACITOR 150M 125V 1.375"D X 3.125"L |
49 | PH7759049 | RIGHT SPARK DEFECTOR |
50 | PH7759050 | LEFT SPARK DEFECTOR |
51 | PLW02M | LOCK WASHER 4MM |
52 | PH7759052 | INNER WHEEL FLANGE |
53 | PH7759053 | FENDER WASHER 5MM |
54 | PS07M | PHLP HD SCR |
55 | PN04M | HEX NUT |
56 | PH7759056 | DOME BOLT |
57 | PH7759057 | PRESSURE PLATE |
58 | PH7759058 | BIG FLAT WASHER 8MM |
59 | PS106M | PHLP HD SCR |
60 | PH7759060 | EYESHIELD PRESSURE PLATE |
61 | PH7759061 | MACHINE ID LABEL |
Safety labels warn about machine hazards and ways to prevent injury. The owner of this machine MUST maintain the original location and readability of the labels on the machine. If any label is removed or becomes unreadable, REPLACE that label before using the machine again. Contact Grizzly at (800)
H7758/H7759 8" & 10" Bench Grinders |