Grizzly H7762 owner manual Grinding Wheels, Work Tables, To install the grinding wheels

Grinding Wheels

The Model H7762 features two Type 50 plate- mounted grinding wheels that must be attached to the grinder body before any operation of the machine.

Components and Hardware Required	Qty
Grinder Unit	1
Type 50 Plate-Mounted Grinding Wheels	2
Hex Bolts M6-1 x 25	8
To install the grinding wheels:

1.Remove the rubber shaft end bushing from the end of the arbor.

2.Carefully slide the grinding wheel onto the arbor. Be sure not to bump or scratch the wheel as it may dent, crack or otherwise damage the wheel.

3.Align the large holes in the grinding wheel with the large screw holes in the connection plate of the grinder.

4.Tightly fasten the wheel to the connector plate using the four hex bolts. In order to properly balance the wheel, tighten the bolts in the order shown in Figure 5.

4th	Grinding
Bolt	Wheel
Arbor	2nd
	Bolt

1st

Bolt3rd Bolt

Figure 5. Wheel bolt mounting order.

-14-

5.Push the rubber shaft end bushing back onto the end of the arbor.

6.Repeat Steps 1-6for the second grinding wheel.

Work Tables

The Model H7762 also features two work tables that must be installed before any work can com- mence.

Components and Hardware Required	Qty
Grinder Unit	1
Work Table Angle Gauges	4
Lock Handles M10-1.25 x 23	4
Flat Washers 10mm	4
Lock Washers 10mm	4
Work Tables	2
Flat Washers 8mm	4
Hex Nuts M8-1.25	4
To install the work tables:

1.Attach an angle gauges to the grinder body wih a 10mm washer, 10mm lock washer and lock handle as shown in Figure 6.

Figure 6. Attaching angle gauge.

H7762 Heavy Duty Tool Grinder