Grizzly T23091 owner manual Operations, Operation Overview

Page 9

SECTION 3: OPERATIONS

This tool presents serious injury hazards to untrained users. Read through this entire manual to become familiar with the controls and opera- tions before using the tool!

EYE INJURY HAZARD!

Wear safety goggles with full eye protection from all sides when using this grinder.

LUNG/EAR

INJURY HAZARD! Wear protective equipment when using this tool.

ACCIDENTAL

START HAZARD! Disconnect before service or tool changes.

AIR PRESSURE

HAZARD!

Never exceed max

PSI rating for tool.

Model T23091 1⁄4" Air Die Grinder

Operation Overview

To complete a typical cutting or grinding operation:

1.Secure the workpiece in a vise.

2.Remove all combustibles, flammable materials, and ignition hazards from the area.

3.Verify the cutter or grinding bit is free of chips or cracks, and install it if it is safe to use.

4.Put on safety goggles, a face shield, and respirator.

5.Make sure that the grinder trigger is in the fully released position (fully out).

6.Place a few drops of air tool oil into the air supply inlet, and connect the grinder to the air supply.

7.Hold the grinder body with both hands, stabilize your body and hands against a fixed object. Next position the grinding bit next to the workpiece.

8.Slowly press the trigger, and carefully feed the cutter or grinding bit into the workpiece. Apply just enough force to remove material while maintaining a high tool RPM.

—If tool hop or vibration makes the grinder hard to control, adjust the throttle valve screw (see Figure 1) to reduce grinder RPM.

9.When finished, or if leaving the area, disconnect the grinder from air, and store it away from children.

-7-

Page 8 Page 10
Image 9
Page 8 Page 10
Contents ⁄4 AIR DIE Grinder Page Table of Contents Safety Instructions for Pneumatic Tools SafetyBefore Operating This Equipment Mation about proper operation of the equipmentAdditional Safety Instructions for Pneumatic Die Grinders Specifications IntroductionForeword Contact Info Identification Collet Insert Throttle Valve Adjustment Screw Collet NutUnpackingAssembly SetupAir supply setup tips InventoryOperations Operation OverviewTo complete a typical cutting or grinding operation Accessories G8210-50-Pc. Stone SetT20887 T20881 G6261 G7870 G7872 G7871 G7866 T21767G7867 H3105-Clamp Style Magnifying LampMaintenance Before and after each usePeriodically as required Troubleshooting ServicePort Model T23091 1⁄4 Air Die Grinder Parts Main Parts Diagram Main Parts ListWarranty

T23091 specifications

The Grizzly T23091 is a powerful and versatile woodworking tool designed to meet the demands of both hobbyists and professional craftsmen. This 10-inch table saw is engineered with precision and innovation, making it an essential addition to any workshop.

One of the standout features of the Grizzly T23091 is its robust 2-horsepower motor. This strong motor allows users to cut through a wide variety of materials, including hardwoods and engineered woods, with ease and accuracy. The saw's direct-drive system ensures efficient power transfer, minimizing energy loss while maximizing cutting performance.

The T23091 boasts a heavy-duty cast iron table, which provides stability and a large work surface for handling sizable workpieces. With its finely ground surface, the table reduces friction, allowing for smoother cuts and enhanced overall performance. Additionally, the table features an extension wing that increases the surface area, making it easier to handle larger sheets of material.

Precision is crucial in woodworking, and the Grizzly T23091 does not disappoint. It includes a high-quality aluminum rip fence that can be easily adjusted to ensure straight cuts. The onboard measuring scale is clear and easy to read, allowing users to set cuts accurately. The fence locks securely in place, providing peace of mind during operation.

Safety is paramount when working with power tools, and the Grizzly T23091 incorporates several safety features. An accessible blade guard protects users from accidental contact with the saw blade while ensuring a clear view of the cutting line. The push stick and miter gauge included with the saw further enhance user safety by promoting proper cutting techniques.

Moreover, the T23091 features an integrated dust collection port. This allows for improved cleanliness in the workspace, helping to minimize debris and sawdust during operation. Users can connect a shop vacuum or dust collector for enhanced efficiency in maintaining a tidy work environment.

In terms of technology, the Grizzly T23091 is designed for ease of use, with intuitive controls that cater to both beginner and experienced users. The tool's durable construction ensures longevity, making it a worthwhile investment for anyone serious about woodworking.

In conclusion, the Grizzly T23091 combines power, precision, and safety features in one user-friendly package. Its strong motor, robust design, and thoughtful technology make it a reliable choice for achieving professional-quality results in woodworking projects.
Top Page Image Contents