Grizzly T10010 Positioning Universal Support, To work against the rotation of the grinding wheel

Page 13

Positioning the

Universal Support

The Model T10010 Wet Grinder is equipped with a universal support that serves as a tool rest and as an attachment point for job-specific accessories. It can be attached in two positions, allowing for grinding with or against the rotation direc- tion of the grinding wheel. The tightening knobs on each attachment point allow the universal support to be adjusted and locked in position, depending on the spe- cific task required.

To work against the rotation of the grinding wheel:

1.Position the machine with the ON/OFF switch facing you.

2.Attach the universal support in the ver- tical mounts as shown in Figure 6. Be sure it is securely positioned and will not move during grinding.

3.Rest your workpiece on the univer- sal support with the sharpened edge pointing away from you. Grind your workpiece in the indicated grinding area.

Grinding

Area

Universal

Support

Vertical

Mounts

Figure 6. Vertical mount.

Working against the rotation removes large amounts of materials quickly but does not yield precise results. Use this method for coarse tools such as axes.

Model T10010 Wet Grinder

To work with the rotation of the grind- ing wheel:

1.Position the machine with the ON/OFF switch facing away from you.

2.Attach the universal support in the horizontal mounts as shown in Figure 7. Be sure it is securely positioned and will not move during grinding.

3.Rest your workpiece on the univer- sal support with the sharpened edge pointing away from you. Grind your workpiece in the indicated grinding area.

Grinding

 

Area

 

Horizontal

Universal

Mounts

Support

Figure 7. Horizontal mount.

The universal support should never be placed in the vertical mounts while using the leather stropping wheel. Working against the direction of rotation in this case will cause severe damage to the leather wheel.

Working with the rotation yields much more precise results and removes less material. Use this method for finer tools, such as knives or carving tools.

Do not make adjustments while the machine is running. Disconnect the grinder from power before attempting to make adjustments to the universal support, water reservoir, changing wheels or the angle guide.

-13-

Image 13
Contents WET Grinder Page Safety Instructions for Machinery SafetyBefore Operating This Equipment Mation about proper operation of the equipmentAlways Lock Mobile Bases if Used Before Operating Machinery Additional Safety Instructions for Grinders Foreword Contact Info IntroductionModel T10010 Wet Grinder 110V Operation Circuit RequirementsUnpackingInventory SetupModel T10010 Inventory Figure To perform a Ring Test Site Considerations Wheel InspectionTo test run the machine Test RunOperations Operation SafetyGrinding Tips This machineTo work against the rotation of the grinding wheel Positioning Universal SupportTo work with the rotation of the grind- ing wheel To fill and position the reservoir Water ReservoirTo use the angle guide Angle GuideTo prepare the stropping wheel Wheel Dressing SharpeningModel T10023 AccessoriesModels H5891 Wheel Replacement MaintenanceGrinding Wheels To replace the grinding or stropping wheelTroubleshooting ServiceGrinder Operations Symptom Possible Cause Solution Switch connections Wiring DiagramDescription Main Breakdown & Parts List101 102 103 104 Warranty Card BOX BELLINGHAM, WA Name Street CityStateZipWarranty