Safety instructions

The tool must be used only for the prescribed purpose.

Any uses other than those mentioned in this manual will be considered a case of misuse. The user and not the manufacturer shall be liable for any damage or injury resulting from such cases of misuse.

To use this tool properly, you must observe the safety regulations, the assembly instructions and the operating instructions to be found in this Manual. All persons who use and service the machine have to be acquainted with this Manual and must be informed about its potential hazards. Children and infirm people must not use this tool. Children should be supervised at all times if they are in the area in which the tool is being used. It is also imperative that you observe the accident prevention regulations in force in your area. The same applies for general rules of occupational health and safety.

The manufacturer shall not be liable for any changes made to the tool nor for any damage resulting from such changes.

Warning. Before connecting a tool to a power source (mains power point receptacle, outlet, etc.), be sure that the voltage supply is the same as that specified on the nameplate on the tool. A power source with a voltage greater than that specified for the tool can result in serious injury to the user, as well as damage to the tool.

If in doubt, do not plug in the tool. Using a power source with a voltage less than the nameplate rating is harmful to the motor.

Even when the tool is used as prescribed it is not possible to eliminate all residual risk factors. The following hazards may arise in connection with the tool’s construction

and design:

•Contact with the wheel.

•Kickback of work piece and parts of work piece.

•Wheel fracture.

•Catapulting of wheel pieces.

•Damage to hearing if effective earmuffs are not worn.

•Damage to eyes if eye protection is not worn

•Damage to lungs if breathing protection is not worn

•Always remove the plug from the mains socket before making any adjustments or maintenance, including changing the wheel.

Warning. When using power tools, basic safety precautions should always be taken to reduce the risk of fire, electric shock and personal injury. Also, please read and heed the advice given in the additional important safety instructions.

1.Keep the work area clean and tidy. Cluttered work areas and benches invite accidents and injury.

2.Consider the environment in which you are working. Do not use power tools in damp or wet locations. Keep the work area well lit. Do not expose power tools to rain and high humidity. Do not use power tools in the presence of flammable liquids or gases.

3.Keep visitors away from the work area. All visitors and onlookers, especially children and infirm persons should be kept well away from where you are working. Do not let others in the vicinity make contact with the tool or extension cord.

4.Store tools safely. When not in use, tools should be stored in a dry, high place or locked up out of reach.

5.Do not force the tool. The tool will do the job better and safer working at the rate for which it was designed.

6.Use the correct tool for the job. Do not force small tools or attachments to do the job best handled by a heavier duty tool. Never use a tool for a purpose other than that for which it was intended.

7.Dress correctly. Do not wear loose clothing or jewelry. They can be caught in moving parts. Rubber gloves and non-slip footwear are recommended when working outdoors. If you have long hair, wear a protective hair covering.

BG612HPL, BG834HPL specifications

Global Machinery Company has made a significant impact in the machinery industry with its innovative BG834HPL and BG612HPL models. These machines are designed to cater to various needs in construction, agriculture, and industrial applications, providing robustness, efficiency, and ease of use.

The BG834HPL is a high-performance excavator that stands out for its power and flexibility. It is equipped with a powerful engine that delivers optimal performance under different working conditions. One of the main features of the BG834HPL is its advanced hydraulic system, which allows for precise control and efficient operation. This system not only reduces fuel consumption but also enhances the overall effectiveness of the machine.

Additionally, the BG834HPL boasts a spacious and ergonomic cab that ensures operator comfort. With intuitive controls and excellent visibility, operators can work longer hours without fatigue. The machine is also designed with a high level of safety in mind, featuring reinforced structures and safety mechanisms that protect the operator and those working around it.

On the other hand, the BG612HPL is a compact yet powerful earth-moving machine that excels in tight spaces and urban environments. Despite its smaller size, the BG612HPL does not compromise on performance. It is powered by a state-of-the-art engine that meets stringent emission standards, making it an environmentally friendly choice for users who are conscious of their carbon footprint.

The BG612HPL features advanced traction technology, ensuring optimal stability and control on various terrains. Additionally, its quick coupling system allows for easy attachment changes, maximizing versatility and productivity. The machine's compact design is complemented by a robust build, ensuring longevity and low maintenance costs.

Both models utilize cutting-edge technology, including telematics systems for real-time tracking and monitoring of machine performance. This feature provides users with valuable insights, allowing them to optimize operations and minimize downtime.

In conclusion, the BG834HPL and BG612HPL from Global Machinery Company are exemplary models that embody innovation and efficiency. With their powerful performance, advanced technologies, and user-centric designs, they are ideal choices for professionals seeking reliable machinery to tackle demanding tasks. As the industry continues to evolve, these models represent a commitment to quality and excellence in engineering, ensuring that Global Machinery Company remains at the forefront of the machinery market.