Fitting the tool rests

Caution. During use it is important not to overload the grinder. The grinder should run at close to full speed. If you are applying too much pressure the grinder will start to slow down. Under these conditions, remove the part being ground and allow the grinder to return to full speed. Re-apply the part to the grinder, but with a little less force.

All of the grinders are supplied with grinding wheels designed for metal use only. The grinding of Copper, Brass, Aluminium, Wood or other similar materials will “clog” the grinding wheel.

Warning. Never attempt to grind Magnesium.

Fitting and adjusting the eye shields

Important. Prior to fitting the eye shields, ensure the grinder is turned off and the power plug is removed from the socket.

Note. Always check to ensure the eye shields are correctly fitted each time the grinder is used. Eye shields must be fitted over each grinding wheel on all bench grinders in the range.

1.The MagniVision eye shield (1) features a magnifying glass incorporated into the design to provide greater visibility and improved accuracy.

2.Take the MagniVision eye shield and fit it to the top of the right hand side light assembly. The other eye shield

(2)should be installed on the left hand side.

3.Fit a plastic coated screw through each side of the eye shield into the pivot points on the light assembly and tighten firmly to the point where the shield is secure, but still able to be adjusted up and down.

The securing screws are plastic

coated so they can be adjusted at any time without the use of tools.

Fitting and adjusting the spark deflectors

1.The spark deflectors (12) are already fitted to the bench grinder but will need to be adjusted prior to use, and then over time to compensate for wheel wear.

2.To adjust the spark deflectors loosen the screw using the allen key supplied.

3.Slide the spark deflector up or down so that the bottom edge is less than 6mm from the surface of the wheel, but not touching the wheel.

4.Rotate the wheel by hand one full rotation to ensure the wheel can rotate without contacting the spark deflector. Firmly tighten the screw retaining the spark deflector.

The tool rests (10) are required for each high speed grinding wheel to assist in the grinding operation.

Caution. Never use a Bench Grinder on which the tool rest has not been fitted or where the tool rest has not been correctly adjusted.

The right hand side tool rest features an indentation that helps you rest your work piece for more accurate grinding.

BG612HPL, BG834HPL specifications

Global Machinery Company has made a significant impact in the machinery industry with its innovative BG834HPL and BG612HPL models. These machines are designed to cater to various needs in construction, agriculture, and industrial applications, providing robustness, efficiency, and ease of use.

The BG834HPL is a high-performance excavator that stands out for its power and flexibility. It is equipped with a powerful engine that delivers optimal performance under different working conditions. One of the main features of the BG834HPL is its advanced hydraulic system, which allows for precise control and efficient operation. This system not only reduces fuel consumption but also enhances the overall effectiveness of the machine.

Additionally, the BG834HPL boasts a spacious and ergonomic cab that ensures operator comfort. With intuitive controls and excellent visibility, operators can work longer hours without fatigue. The machine is also designed with a high level of safety in mind, featuring reinforced structures and safety mechanisms that protect the operator and those working around it.

On the other hand, the BG612HPL is a compact yet powerful earth-moving machine that excels in tight spaces and urban environments. Despite its smaller size, the BG612HPL does not compromise on performance. It is powered by a state-of-the-art engine that meets stringent emission standards, making it an environmentally friendly choice for users who are conscious of their carbon footprint.

The BG612HPL features advanced traction technology, ensuring optimal stability and control on various terrains. Additionally, its quick coupling system allows for easy attachment changes, maximizing versatility and productivity. The machine's compact design is complemented by a robust build, ensuring longevity and low maintenance costs.

Both models utilize cutting-edge technology, including telematics systems for real-time tracking and monitoring of machine performance. This feature provides users with valuable insights, allowing them to optimize operations and minimize downtime.

In conclusion, the BG834HPL and BG612HPL from Global Machinery Company are exemplary models that embody innovation and efficiency. With their powerful performance, advanced technologies, and user-centric designs, they are ideal choices for professionals seeking reliable machinery to tackle demanding tasks. As the industry continues to evolve, these models represent a commitment to quality and excellence in engineering, ensuring that Global Machinery Company remains at the forefront of the machinery market.