INTRODUCTION
General
Thank you for purchasing Woodstock International’s SHOP FOX® Classic Fence. This fence is classic in its design and function, and provides a perfect upgrade for table saw owners who expect precision and ease of installation. It has been designed to fit almost all contractor and
The SHOP FOX® Fence features include:
•Wide
•Single locking action cam lever.
•Simple mounting procedure, easy lift off design for the fence makes using jigs and fixtures simple.
•HDPE high durability plastic fence surface provides low sliding resistance.
•Fence can be used on either the right or left side of the blade.
•Magnified cursor can be mounted on either side of the fence.
•Fence body has powder coated paint surface for durability.
•Standard rails provide 25" maximum rip to the right of the blade (W2005).
•Optional long rails provide 54" maximum rip to the right of the blade (W2006).
Woodstock is pleased to provide this manual to assist in the installation and operation of the SHOP FOX® Classic Fence. It represents our effort to offer the finest documentation available. If you feel there are areas where this manual could be improved, we encourage you to write us with your comments at the following address:
Technical Documentation
Woodstock International, Inc.
P.O. Box 2309
Bellingham, WA 98227
Tel: (360)
Fax: (360)
This fence was specifically designed to be used on table saws to assist in cutting operations. DO NOT MODIFY AND/OR USE THIS FENCE FOR ANY OTHER PURPOSE. Modifications or improper use of this device will void the warranty. If you are confused about any aspect of this accessory, DO NOT use it until all your questions have been answered. Serious injury may occur.
Shop Fox® Classic Fence |