SHOP FOX® CLASSIC FENCE |
MODEL H6472 |
MANUAL INSERT |
Introduction
The Model H6472 Shop Fox Classic Fence is made exclusively for Grizzly Industrial by Woodstock International to fit the Model G7209/G7210 14" Table Saw. The Model H6472 is exactly the same as the regular Shop Fox Classic fence, except that the fence body, fence facing, and rails are different.
Parts Exclusive to H6472
(for all others refer to W2005 parts)
���
How to Use this Sheet
This instruction sheet was designed to be used in conjunction with the instruction manual provided by Woodstock International, which is intended for the regular Shop Fox Classic Fence (Model W2005/W2006/W2007).
Because this is fence is produced only for Grizzly Industrial, replacement parts exclusive to the Model H6472 (shown to the right) are only avail- able through Grizzly Industrial.
All other parts common to the Model W2005/ W2006/W2007 can be ordered through the instruction manual included with your fence by Woodstock International.
All instructions for the Model H6472 are the same as the instructions for the Model W2005/W2006/ W2007, which are found in the instruction manual included with your fence.
��
��
���
REF | PART # | DESCRIPTION |
8 | PH6472008 | FENCE BODY |
8A | PH6472008A | FENCE FACING |
10 | PH64720010 | REAR RAIL |
10A | PH64720010A | FRONT RAIL SUPPORT |
If you need additional help with assembly or set up, we will be glad to help! Call our service department at: (570)
COPYRIGHT © OCTOBER, 2004 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE
WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL.
#TR6708 PRINTED IN TAIWAN