To Use The Template Guide:
1.The Template Guide is used with a template (not provided) for producing a large quantity of identically shaped products. A template is a mold made of plywood or thin lumber. The template should also have openings large enough to admit the Router Bit and the Template Guide.
2.Secure the Template Guide (part #65) to the Base of the Router with the two accessory Machine Screws (part #67). Make sure the projected side of the Tem- plate Guide is facing the bottom surface of the Base of the Router. (Figure G)
3.Clamp the template to the workpiece in the desired location.
4.Feed the Router in a manner so that the Template Guide moves along the template.
Figure G
67
67 
65
65
SKU 43585 | For technical questions, please call | Page 8 |