To Use The Trimmer Guide:
The Trimmer Guide allows you to follow curved edges. NOTE: Because the Trimmer Guide is narrower than the Straight Guide, it requires greater skill and attention to produce a cut that is consistent in its relation to the edge.
1.To assemble the Trimmer Guide Assembly (part #71) attach the Roller (part #72) to the Set Plate (part #73) using the accessory Bolt Washer (part #74) and the Wing Bolt (part #75). (Figure I)
2.Attach the Trimmer Guide Assembly to the Bar Holder (part #69), using the acces- sory Bolt Washer (part #74) and the Wing Bolt (part #75). (Figure J)
3.After measuring and setting the desired distance from Bit cutting depth to edge of workpiece, carefully follow the edge of the workpiece as shown. (Figure K)
Figure I
71 73
72
74
75
Figure J
Figure K
74/75
74/75
SKU 43585 | For technical questions, please call | Page 9 |