Operating Instructions
Read the entire Important |
| To prevent serious |
| ||
Safety Information section at the |
| injury from |
beginning of this manual including |
| accidental operation: |
| ||
all text under subheadings therein | Turn the Power Switch off and unplug the Router | |
before set up or use of this product. | before adjusting or installing accessories. | |
Tool Set Up
Installing Bits
1 Unlock the Lock Lever (30). | 2 | Rotate the Main Housing to raise or |
|
| lower the Spindle so you can access the |
Spindle and Collet Nut with the Wrenches.
Main
Housing
(5)
Lock Lever
(30)
Spindle
3 | Turn the Router upside down and hold the |
| Spindle in place with the Spindle Wrench |
while turning the Collet Nut counterclockwise with the Collet Nut Wrench to loosen the Collet Nut.
Collet | Collet Nut |
Nut (1) | Wrench (51) |
4 | Remove or insert a Collet Chuck as needed | |
| to fit the bit size, then insert the bit (sold | |
separately) | Bit | |
and tighten the | ||
Collet Nut with | (sold separately) | |
| ||
the Wrenches. |
| |
| Collet | Collet Nut |
| Nut (1) | Wrench (51) |
Spindle | Spindle | Spindle | |
Wrench (50) | |||
Wrench (50) | |||
|
|
Page 8 | For technical questions, please call | SKU 68341 |