Grizzly H3114 Securing the fence to the main table, To attach the power switch to the main table

Page 14

3.Slide the pocket jointing fence into the slot in the face of the main fence as shown in Figure 13.

Figure 13. Installing the pocket jointing fence.

4.Secure the pocket jointing fence to the main fence with the supplied M8-1.0 x 20 hex bolt and the M8-1.0 threaded knob.

5.Place the fence assembly on the main table.

6.Align the slots on the fence assembly over the slots on the table surface.

7.Secure the fence assembly to the table with the supplied M8-1.0 x 40 hex bolts and the M8-1.0 threaded knobs as shown in Figure 14.

Figure 14. Securing the fence to the main table.

To attach the power switch to the main table:

1.Secure the power switch to the main table with the supplied #10-32 x 3⁄4" truss head phillips screws and the #10-32 keps nuts as shown in Figure 15. Note—The power switch mounting bracket should be on the inside of the main table edge.

Figure 15. Securing the power switch

to the main table.

2.Flip the table assembly top-side up.

-12-	H3114 Router Table

Image 14

Contents Router Table Page Table of Contents Safety Safety Instructions For Power ToolsLength AMP Rating 25ft 50ft 100ftAdditional Safety Instructions For Router Tables Introduction CommentaryElectrical Circuit RequirementsGeneral SET UP Main FeaturesAssembly Page To mount the router to the table MethodCorrectly clamped router To assemble the fenceTo attach the power switch to the main table Securing the fence to the main tableTo secure the router table to a workbench To assemble the miter gaugeOperation FenceGroove cutting setup Top View Proper setup for profile cutting Reference Info Parts Breakdown and List M5-0.8 X 45 Carriage Bolt H3114 Router Table H3114 Router Table Warranty and Returns Warranty Card Grizzly INDUSTRIAL, INC BOX BELLINGHAM, WAPage Call Today For a Free Full Color Catalog