Grizzly H3114 instruction manual

Page 11
4. Double check the the flushness of the work- ing surface with the straightedge.
-9-
Retighten the mounting screws.
3.
To check the flushness of the table:
1. Place a straightedge across both extension tables and the main table. The straightedge should sit flush on all three surfaces as shown in Figure 6.
Figure 6. Using a straightedge to ensure the
working surfaces are flush.
2. If either extension table is not flush with the main table, loosen the mounting screws and adjust the assembly until both extension tables and the main table are flush with one another.

3.Align one of the legs with the mounting holes on the inside edge of the main table as shown in Figure 4.

Figure 4. Aligning a leg with the main table.

4.Secure the leg and extension table to the main table with the supplied #10-32 x 34" truss head phillips screws and the #10-32 keps nuts as shown in Figure 5.

Figure 5. Securing a leg to the main table.

5.Repeat Steps 3 & 4 for the remaining three legs.

H3114 Router Table

Image 11
Contents Router Table Page Table of Contents Safety Instructions For Power Tools Safety25ft 50ft 100ft Length AMP RatingAdditional Safety Instructions For Router Tables Commentary IntroductionElectrical Circuit RequirementsGeneral Main Features SET UPAssembly Page Method To mount the router to the tableTo assemble the fence Correctly clamped routerSecuring the fence to the main table To attach the power switch to the main tableTo assemble the miter gauge To secure the router table to a workbenchFence OperationGroove cutting setup Top View Proper setup for profile cutting Reference Info Parts Breakdown and List M5-0.8 X 45 Carriage Bolt H3114 Router Table H3114 Router Table Warranty and Returns Warranty Card BOX BELLINGHAM, WA Grizzly INDUSTRIAL, INCPage Call Today For a Free Full Color Catalog