Black & Decker G900 Maintenance, Protecting the Environment, Service Information Specifications

20 • ENGLISH

MAINTENANCE

Cleaning

Warning! Blowing dust and grit out of the motor housing using compressed air is a necessary maintenance procedure. Dust and grit from metal grinding often accumulate on interior surfaces and could create an electrical shock hazard if not cleaned out.

Warning! Always use safety glasses. Everyday eyeglasses are Not safety glasses. Also use face or dust mask if operation is dusty. Always wear certified safety equipment.

Use only mild soap and a damp cloth to clean the tool. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid.

Important! To assure product Safety and Reliability, repairs, maintenance and adjustment (other than those listed in this manual) should be performed by authorized service centers or other qualified service personnel, always using identical replacement parts.

PROTECTING THE ENVIRONMENT

Separate collection. This product must not be disposed of with normal household waste. Should you find one day that your Black & Decker product needs replacement, or if it is of no further use to you, do not dispose of it with household waste. Make this product available for separate collection.

Separate collection of used products and packaging allows materials to be recycled and used again. Re-use of recycled materials helps prevent environmental pollution and reduces the demand for raw materials. Local regulations may provide for separate collection of electrical products from the household, at municipal waste sites or by the retailer when you purchase a new product.

SERVICE INFORMATION

Black & Decker offers a full network of company-owned and authorized service locations. All Black & Decker Service Centers are staffed with trained personnel to provide customers with efficient and reliable power tool service. For more information about our authorized service centers and if you need technical advice, repair, or genuine factory replacement parts, contact the Black & Decker location nearest you, or visit us at www.BlackandDecker-la.com

SPECIFICATIONS	G900/G900K
Voltage
B3	120V
Power	900W
No-load speed	n0 11000/min
Disc diameter	4 - ½" (115mm)
Disc bore	22mm
Spindle size	5/8"-11 / M14

TROUBLESHOOTING

PROBLEM	CAUSE	SOLUTION
Unit will not start.	1. Cord not plugged in.	1. Plug tool into a working outlet.

2.Circuit fuse is blown.

2.Replace circuit fuse. (If the product repeatedly causes the circuit fuse to blow, discontinue use immediately and have it serviced at a Black & Decker service center or authorized servicer.)

3.Circuit breaker is tripped.

3.Reset circuit breaker. (If the product repeatedly causes the circuit breaker to trip, discontinue use immediately and have it serviced at a Black & Decker service center or authorized servicer.)

4.Cord or switch is damaged.

4.Have cord or switch replaced at a Black & Decker service center or authorized servicer.