7.Plug the chopper in and run for one second. Turn off the chopper and check to see if the ring is tight. If it is loose, then tighten it. Your chopper is now ready to operate.
MAINTENANCE
The knives and plates should be kept together as a matched set. Failure to do so will result in mis- matched cutting surfaces, which will lower productivity and product quality. When the knife becomes dull, have it and its matching plate sharpened together. When the plate no longer extends beyond the end of the cylinder, replace both the knife and the plate.
The threads on the cylinder and ring must be kept clean. If they become clogged, take a stiff bristle brush and clean them. Also, keep the threads coated with a thin coat of grease.
Inspect the
TROUBLESHOOTING
If your chopper should fail to function, there are several things you can check before calling a ser- vice technician.
1.Check to see that the power cord is plugged in. If so, try plugging another piece of equipment into the same outlet to verify that there is power at the outlet.
2.Unplug the chopper and remove the ring, plate, knife and feedscrew. Check to see if there is any obstruction. Inspect the knife and plate for sharpness. If they are dull, sharpen or replace imme- diately.
If there is still a problem, contact your nearest Designated Berkel Service Location.
REPAIRPARTS/REPAIRSERVICE
Please contact your Designated Berkel Service Location for any repair parts and/or repair service required on your Berkel grinder. Additional information may be obtained from:
Service Support Center Berkel Company
4406 Technology Drive
South Bend, Indiana
8 •