Franklin warranty Charging the R526A Device, 2 / 27 R526AUGRev1.0EN29032012

Thank you for purchasing the Franklin Wireless R526A portable router. This device doesn’t need wires, cables, or software to configure it through your Web browser.

This guide describes the browser Interface that allows you to configure the R526A. For information about setting up your device, device maintenance and care, etc., consult the printed Quick Start Guide that came with your device.

We recommend you read this manual before using the R526A.

Part 1

Using the R526A

Charging the R526A Device

Note.

The battery should be fully charged before using the R526A for the first time. We recommend an initial charge time of approximately 2 hours. When fully charged, a solid green light will appear next to ‘Power’ display on the device. A red or orange light indicates you need to re-charge. Included in your R52A6A package is an AC-Adapter. Alternatively, you can use a USB cable to charge/re-charge your device (sold separately).

Opening the Browser Interface

How to Connect to the R526A (Windows Users – for MAC Instructions see the next section)

1.Turn on the R526A and ensure your WiFi is enabled on your PC or laptop. You can view your available wireless networks by going through the control panel, network connections or system tray (lower right hand corner of your screen).

Page 2 / 27 R526A_UG_Rev1.0_EN_29032012