Before You Begin

Unpacking and Inspecting

The following items are shipped with these systems.

Foundry system		Two 19-inch (48.26 cm) rack-mount brackets
AC power cord		Two 23-inch (58.42 cm) rack-mount brackets
	RJ-45 console cable		Four #6 screws
	Male DB-9 modular adapter		Four each #6 flat washers and #6 lock washers

Female DB-9 modular adapter Product Documentation CD-ROM

	Four self-adhering rubber feet		Registration card
	Quick start guide		Warranty form

If any of the above items are missing or defective, contact Foundry.

The following additional cables are required for integrating these systems with other networking devices.

•RJ-45, male/male, Category 5, shielded, twisted pair cable (Ethernet ports)

•RJ-48C, male/male, shielded, straight-through cable (T1/E1 ports)

•RG-59 coaxial cables with BNC connectors (Clear Channel DS3 and CT3) The following tools are required for installation.

•#3 Phillips screwdriver (rackmount)

•#2 Phillips screwdriver (mounting bracket)

•1/8 inch (3 mm) flat-blade screwdriver (DC power, ground, and external alarm)

•wire stripping tool (DC power and external alarm)

The following additional materials are required for connecting DC power, ground, and external alarms to the Foundry system.

•18-22 AWG wire (external alarm and ground)

•18 AWG wire (DC power)

June 2004

2 - 1