Installing and Configuring Rack-Mounted Systems
T1 Interface
EXAMPLE:AR1208-T# configure term
EXAMPLE:AR1208-T/configure# module t1 4
EXAMPLE:AR1208-T/configure/module/t1 4# clock_source line
EXAMPLE:AR1208-T/configure/module/t1 4# framing esf
EXAMPLE:AR1208-T/configure/module/t1 4# linecode b8zs
EXAMPLE:AR1208-T/configure/module/t1 4# yellow_alarm gen_det
EXAMPLE:AR1208-T/configure/module/t1 4# exit 3
E1 Interface
EXAMPLE:AR1208-E# configure term
EXAMPLE:AR1208-E/configure# module e1 4
EXAMPLE:AR1208-E/configure/module/e1 4# clock_source line
EXAMPLE:AR1208-E/configure/module/e1 4# framing crc
EXAMPLE:AR1208-E/configure/module/e1 4# exit 2
EXAMPLE:AR1208-E/configure# cabletype monitor_port 1 twisted_pair
EXAMPLE:AR1208-E/configure# module e1 4
EXAMPLE:AR1208-E/configure/module/e1 4# linecode hdb3
EXAMPLE:AR1208-E/configure/module/e1 4# yellow_alarm gen_det
EXAMPLE:AR1208-E/configure/module/e1 4# exit 3
Bundle Configuration
Foundry systems support PPP, MLPPP, FR, MFR, and Cisco-compatible HDLC for WAN data transmission.
NOTE: Bundle names cannot exceed eight characters.
The following are examples of bundles configured for T1/E1, fractional T1/E1, and NxT1/NxE1 transmission.
