Black Box VX-HDMI-POE-UTX, VX-HDMI-POE-MTX, VX-HDMI-POE-MRX manual Target Show OSD checkbox

Chapter 7: Video Wall Features

Table 7-2. Advanced Setup screen components.

Component	Description
Step 1: Choose control	Click on the arrows and buttons to select a control
target	target.
Show OSD checkbox	Check this box to output each receiver’s specific
	number to the connected monitor.
Step 2: Control options
Reset to Basic Setup,
Single Host Mode	Check this box, then press the “Reset” button.
checkbox
Screen Layout	Select the number of rows and columns from the
	drop-down menu, then click on the “Apply”
(Row x Column)
	button.
Row Position	Select the row from the drop-down menu, then
	click on the “Apply” button.
Column Position	Select the column from the drop-down menu,
	then click on the “Apply” button.
Horizontal Shift	Use to shift video output horizontally, then click on
(N*8 pixels)	the “Apply” button.
Vertical Shift	Use to shift video output vertically, then click on
(HOST: N pixels
	the “Apply” button.
CLIENT: N*8 pixels)

Page 40 724-746-5500 blackbox.com