Operating Controls
Depth Stop | Adjustment | FIG. 1 |
| Nut, Upper |
|
Dremel
ReleaseRotary Tool
Button
Speed Control
Mounting Wrench
Adjustment Nut, Lower
& Storage Area
Hand Grip
Hand Grip
(turn to lock) (stationary)
Shaft Lock | Collet Nut Wrench |
Storage Area | |
Button | (Wrench not included) |
| Depth Scale |
| (English/Metric) |
| Edge Guide |
Circle
Guide
Assembling Plunge Router Attachment to your Tool
ATTACHMENT FOR USE WITH DREMEL ROTARY TOOL MODELs 275, 285, 395, & 398.
Disconnect the plug from ! WARNING the power source before
making any assembly, adjustments or changing accessories. Such preventive safety measures reduce the risk of starting the tool accidentally.
1. Remove collet nut, then remove housing cap from your rotary tool and set housing cap aside (Fig. 2). The housing cap must be reinstalled when this attachment is not used. Once housing cap has been removed, reassemble the collet nut.
FIG. 2
2.Place tool into your router attachment with the shaft lock button facing forward as shown (Fig. 3).
3.Thread mounting nut clockwise onto the threaded portion of your Rotary Tool and securely tighten with the mounting wrench provided.
FIG. 3
Shaft Lock
Button
Mounting 
Nut
Housing | Mounting |
Cap | Wrench |
3