EnGenius Technologies ECB350 manual Hardware Installation

Page 15

14

2.4 Hardware Installation

1.Ensure that the computer in use has an Ethernet Controller (RJ-45 Ethernet Port). For more information, verify with your computer user manual.

2.Connect one end of the Category 5 Ethernet cable into the RJ-45 port of the ECB350 and the other end to the RJ-45 port of the computer that will use the ECB350. Ensure that the cable is securely connected to both the ECB350 and the Computer.

3.Connect the Power Adaptor DC Inlet to the DC-IN port of the ECB350 and the Power Adaptor to the electrical outlet. Once both connections are secure, verify the following:

a)Ensure that the POWER light is on (it will be green).

b)Ensure that the WLAN light is on (it will be green).

c)Ensure that the LAN (Computer/ECB350 Connection) light is on (it will be green).

d)Once all three lights are on, proceed to setting up the computer.

This diagram depicts the hardware configuration.

Image 15

Contents 11N Long Range Multi-Function Gigabit CB / AP ECB350Before you Begin Table of Contents IntroductionConfiguring Your Client Bridge Building a Wireless NetworkWireless SystemRouter Management Version Date 2012/02/22 First Release Revision HistoryIntroduction Features and BenefitsPackage Contents Applications System RequirementsWireless Extensions to Ethernet Networks Wired LAN BackupTraining/Educational Facilities Before you Begin Considerations for Wireless InstallationComputer Settings Windows XP/Windows Page Page  In Configure IPv4, select Manually Apple Mac X OS Select Network in the Internet & Network section Hardware Installation Front Panel Rear Panel Configuring Your Client Bridge Default SettingsDefault Settings Web Configuration Page Client Bridge Mode Building a Wireless NetworkClient Router Mode Access Point Mode Access Point Router Mode WDS AP / WDS Station Mode WDS Bridge Mode Repeater mode Save/Reload StatusMain Page Connection Status Wireless Client List System Log Refresh Clear System LogSystem Operation ModeThis page allows you to modify the devices IP settings IP SettingsSpanning Tree Setting Priority Accept / Cancel WAN Settings RouterStatic IP Page MTU Static IP Internet Connection Type Account Name Domain NameDhcp Use These DNS Servers Discard Ping on WAN Accept / Cancel Internet Connection Type Account Name Domain NameGet Automatically From PPPoE PPPoE Internet Connection Type Pptp Pptp This page allows you to modify the devices LAN settings LAN SettingsVPN Pass Through Port Forwarding Page Port Triggering Page DMZ DMZ Hosting DMZ Address Accept / CancelMAC Filter IP Filter Page URL Filter Wireless Wireless NetworkAccess Point / WDS AP / Router mode Page Ssid Profile Ssid ProfileSsid Client Bridge / Client Router / WDS Station / Repeater modeWEP Encryption Wireless SecurityWPA-PSK WPA Pre-Shared Key Encryption Group Key Update IntervalWPA-PSK WPA Pre-Shared Key Encryption Encryption Key #Radius Port WPA Encryption Only in Access Point / WDS AP / Router modeWPA Encryption Radius ServerClick Site Survey Site SurveyPage Channel Signal Level dBm Type Security Refresh Site Survey Client Bridge / Client Router / Repeater modeEnter the correct security setting Wireless MAC Filter Wireless Advanced Page WPS Wi-Fi Protected Setup Passphrase Key Wi-Fi Protected Setup WPSAuthentication Mode Self Pin CodeWDS Link Settings WDS Link Settings MAC Address Mode Accept / Cancel Management AdministrationManagement Vlan Snmp Snmp SettingsPage Backup/Restore To perform the Firmware Upgrade Firmware UpgradeTime Time SettingTime Manually Set Date and Time Automatically Get DateLog Diagnostics LED Control Logout Reset FCC Radiation Exposure Statement Federal Communication Commission Interference StatementIndustry Canada statement Radiation Exposure StatementDéclaration dexposition aux radiations Page Europe EU Declaration of Conformity Appendix C CE Interference Statement0560