42
PPPoE
Internet Connection Type
MTU
Login
Password
Service Name
Connect on Demand
Keep Alive
Get Automatically From ISP
Use These DNS Servers
Discard Ping on WAN
Accept / Cancel
Select PPPoE to begin configuration of the PPPoE connection.
Specify the Maximum Transmit Unit (MTU) size. It is recommended you accept the default setting of Auto. Otherwise, packets will be fragmented downstream if the MTU is set too high or too low, which impacts network performance. In extreme cases, an MTU setting that is too low can prevent the ECB350 from establishing some connections.
Enter the Username provided by your ISP. Enter the Password provided by your ISP. Enter the Service Name provided by your ISP.
Select the radio button to specify the maximum idle time. Internet connection will disconnect when it reach the maximum idle time, but it will automatically connect when user tries to access the network.
Select whether to keep the Internet connection always on, or enter a redial period once the internet lose connection.
Click this radio button to obtain the DNS automatically from the DHCP server.
Click the radio button to set up the Primary DNS and Secondary DNS servers manually.
Check to Enable to recognize pings on the ECB350 WAN interface or Disable to block pings on the ECB350 WAN interface. Note: Pinging IP addresses is a common method used by hackers to test whether the IP address is valid. Blocking pings provides some extra security from hackers.
Click Accept to confirm the changes or Cancel to cancel and return previous settings.