Cisco Systems 4034138, DPC3825, EPC3825, 4034441 Access Restrictions User Setup Page Description

Control Access to the Gateway

Access Restrictions User Setup Page Description

Use the descriptions and instructions in the following table to configure the user setup for your residential gateway. After you make your selections, click Save Settings to apply your changes or Cancel Changes to cancel.

	Section	Field Description
	User	Add User
	Configure	Allows you to add a new user profile. Enter the name of the user and click the Add User
		button to add the user to the list.
		User Settings
		Allows you to edit a user profile by using the drop-down menu to edit a user profile. The
		drop-down menu allows you to recall the profile to be edited. User names and passwords
		are case-sensitive.
		Make sure to check the Enable box to activate the user profile. If a profile is not active, that
		user will not have any access to the Internet.
		To remove a user profile, use the drop-down menu to select the user to be removed and
		click the Remove User button.
		Password
		Enter the selected user's password in this field. Each user must enter their User Name and
		Password each time they use the Internet. User names and passwords are case-sensitive.
		Note: The residential gateway will allow each user access to the Internet, subject to the
		rules selected on this page for that user.
		Re-Enter Password
		Re-enter the same password for confirmation of the password in the previous field.
		Trusted User
		Check this box if the currently selected user is to be designated a trusted user. Trusted
		users are not subject to Internet access rules.
		Content Rule
		Select the Content Rule for the current user profile. Content Rules must first be defined by
		going to the Rules Configuration page. You can access the Rule Configuration page by
		clicking on the “Basic Rules” tab on this page.
		Time Access Rule
		Select the Time Access Rule for the current user profile. Time Access Rules must first be
		defined by going to the Time of Day Rules page. You can access the Time of Day Rules
		page by clicking on the “Time of Day Rules” tab on this page.
		Session Duration
		1440 minutes [Factory default when a user is created. Otherwise, it is 0 (zero)].
		Enter the amount of time in minutes that the user will be granted Internet access beginning
		at the time they sign on using their User Name and Password.
		Note: Set the Session Duration to 0 (zero) to prevent session timeout.
4021196 Rev B		67