Cisco Systems C892FSPK9 manual Back Panel of the Cisco C881SRST-W Voice Router

Chapter 1 Product Overview

Cisco 880 Series ISRs

Figure 1-13shows the back panel details of the Cisco 881SRST-W voice router.

Figure 1-13 Back Panel of the Cisco C881SRST-W Voice Router

										241904
6	1	2	2	3	4	5	7	8	9	10

1	Primary WAN port1—10/100 FE	6	Antenna—captive wireless omnidirectional
			dipole WLAN antenna (wireless models only)
2	Voice ports—four FXS2/DID3 ports, one	7	Reset button
	FXO4 port with TBP5 power failover
3	4-port 10/100 Ethernet switch6	8	Power connector
4	Serial port—console or auxiliary	9	Earth ground connection
5	PoE power connector for optional PoE	10	Kensington security slot
	module7

1.Depending on the router model, the primary WAN port can be either G.SHDL or 10/100 FE.

2.FXS = Foreign Exchange Station.

3.DID = Direct Inward Dialing.

4.FXO = Foreign Exchange Office.

5.TBP = trunk bypass.

6.Ports 0 and 1 provide PoE with the optional PoE module installed

7.The Cisco 880 series ISRs can include an optional PoE module that provides power to 802.3af-compliant devices connected to ethernet ports 0 and 1. If this feature was not configured with the factory order, you must order and install the Field Replaceable Unit (FRU) to enable the PoE function. For this you either need the FRU “800-IL-PM=2” or “800G2-POE-2”. If your device has a separate PoE inlet, use the 800-IL-PM=2, if it has one combined inlet (a description saying “POE OPTION REQUIRES 5A POWER ADAPTOR”), then use the 800G2-POE-2.

Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide

1-16 OL-16215-11