Cisco Systems C892FSPK9 manual Back Panel of the Cisco 892-W Router

Chapter 1 Product Overview

Cisco 890 Series ISRs

Figure 1-23shows the back panel details of the Cisco 892-W router. Nonwireless routers do not have RP-TNC antennas or connectors on the back panel. Some of the features that are shown may not be available on your router. However, the feature locations are similar across all Cisco 890 series routers.

Figure 1-23 Back Panel of the Cisco 892-W Router

272369

	1	2	3	4	5		6	7	8	9	10	11
1	Antenna—dipole swivel antenna attached to					7	PoE power connector for optional PoE
	RP-TNC connectors (wireless models only)						module1
2	Backup—Data BRI2 or V.923 port					8	Reset button
3	Primary WAN port—FE and GE					9	Power connector
4	Auxiliary port					10	Earth ground connection
5	Console port					11	Kensington security slot
6	8-port 10/100 Ethernet switch

1.The Cisco 890 series ISRs can include an optional PoE module that provides power to 802.3af-compliant devices connected to ethernet ports 0 through 3. If this feature was not configured with the factory order you must order and install it to enable the PoE function.

2.The Data BRI port is available only on the Cisco 892 router models.

3.The V.92 port (not shown) is available only on the Cisco 891 router models and is located between the console port and the Ethernet switch.

	Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
1-24	OL-16215-11