Sanyo STB1220C1, STB0810C1, STB1020C1, STB1010C1 Troubleshooting, Problem Possible Cause and Remedy

Page 10

 

Troubleshooting

 

 

PROBLEM

POSSIBLE CAUSE AND REMEDY

 

 

AIR CONDITIONER DOES

• Not plugged in. Plug may have been bumped loose by vacuum cleaner or

NOT OPERATE

furniture.

 

• If plugged in, fuse could have blown or circuit breaker may have been tripped.

 

 

AIR CONDITIONER

• Curtains, blinds or furniture blocking front of air conditioner will restrict air

“DOES NOT HEAT OR

flow.

COOL AS IT SHOULD”

• Thermostat Control may not be set high or low enough. Also, when Fan Switch

 

is at CYCLE, the temperature in the room will vary more than when it’s at

 

CONTINUOUS. Turn knob to another number. Highest setting should provide

 

maximum cooling. The lowest setting should provide maximum heating.

 

• Air filter dirty, should be cleaned at least every 30 days.

 

• Room may have been very hot or cold when air conditioner was first turned on.

 

Allow time for it to cool down or warm up.

 

• Conditioned air may be escaping through open furnace floor registers and cold

 

air returns.

 

• Cooling coils have iced up. To melt ice, set the Fan at high speed and the

 

Thermostat Control to a lower number.

 

 

WATER LEAKS INSIDE

• Air conditioner is not installed level. Install level or tilt slightly toward the

 

outside.

 

 

WATER LEAKS OUTSIDE

• Excess water may overflow in extremely hot and humid weather.

 

This is normal.

 

 

NOISY OPERATION

• When compressor or fan switches on and off, a metallic knock may be heard.

 

This is normal.

 

• Something is hitting or vibrating inside the cabinet. Turn off air conditioner and

 

consult your dealer.

 

 

10

OI-602-12EG

Page 9 Page 11
Image 10
Page 9 Page 11
Contents STB Series Alert Symbols ContentsProduct Information Safety Instructions Installation LocationElectrical Requirements Names of Parts Air IntakeControl Panel and Operation Functions Cool/Heat ModelControl Panel and Operation Functions Other Features VentCare and Cleaning Tips for Energy Saving Do notTroubleshooting Problem Possible Cause and RemedySanyo Fisher Company
Related manuals
Manual 52 pages 25.9 Kb

STB1020C1, STB1220C1, STB0811C1, STB1023C1, STB0810C1 specifications

The Sanyo STB1123C1, STB1010C1, STB0810C1, STB1023C1, and STB0811C1 are part of Sanyo's robust lineup of electronic components designed for various applications. These models are widely recognized for their reliability and efficiency, making them ideal for a range of consumer and industrial uses.

The Sanyo STB1123C1 stands out with its impressive voltage ratings and high current capabilities. It features a compact design that ensures easy integration into smaller systems while maintaining excellent thermal performance. The device is built using advanced semiconductor technology, allowing it to operate at higher frequencies with reduced power loss.

The STB1010C1 model, meanwhile, is designed for optimal performance in DC-DC converters. It incorporates features that allow for high efficiency and minimal noise during operation. This model also includes built-in protection mechanisms against thermal overload, ensuring long-lasting performance and reliability in demanding environments.

Another noteworthy component is the STB0810C1, which excels in low-power applications. Its compact size and low gate charge make it suitable for battery-operated devices, contributing to improved energy efficiency and extended battery life. This model is particularly appreciated in mobile and portable electronics where power consumption is a critical factor.

The Sanyo STB1023C1 is ideal for switching applications, offering enhanced speed and efficiency. Its rapid switching capabilities allow for reduced signal delays, making it perfect for digital circuits and high-frequency applications. This model's low on-resistance also reduces heat generation during operation, which is crucial for maintaining performance under load.

Lastly, the STB0811C1 is crafted for specific industrial applications, ensuring robust performance in harsh environments. It boasts excellent thermal management features, making it resistant to overheating even under continuous operation. The model is designed to handle substantial power loads, providing stability and reliability in challenging conditions.

All these models share a foundation in Sanyo's commitment to innovation and quality. They incorporate protection features like overcurrent and overload protection, enhancing the safety and longevity of the devices in which they are used. Each model is an example of Sanyo's dedication to delivering high-performance electronic components that meet the diverse needs of modern applications across industries. Their collective characteristics ensure they remain integral to advancing technology in various sectors.
Top Page Image Contents