Care and Cleaning

Front Grille & Wall Case Wash the front grille and wall case finish with mild soap or detergent and lukewarm water.

Control Panel The control panel is shipped with a protective plastic film. This film can be left on or removed. To clean, use a damp cloth and mild detergent.

Outdoor Coil The coil on the outdoor side of the unit should be checked periodically and cleaned if clogged with dirt or soot from the atmosphere. If extremely dirty, it may need to be professionally steam cleaned.

Base Pan In some installations, dirt or other foreign matter may be blown into the from the outside and settle in the base pan (the bottom of the unit).

Check the base pan periodically and clean it out, if necessary.

Front Grille Removal The front grille can be removal for more through cleaning or to make the (appearance may vary) model and serial numbers accessible.

Air Filter The air filter behind the front grille should be checked and cleaned at least (appearance may vary) every 30 days or more often if necessary.

Clean the filter with a vacuum cleaner to remover light dust. It can also be washed in warm, soapy water.

Condenser Coils The coils on the weather side of the air conditioner should be checked regularly. If they are clogged with dirt or soot they may be professionally steam cleaned, a service available through your Sanyo service outlet.

8	OI-602-10EG

STB1020C1, STB1220C1, STB0811C1, STB1023C1, STB0810C1 specifications

The Sanyo STB1123C1, STB1010C1, STB0810C1, STB1023C1, and STB0811C1 are part of Sanyo's robust lineup of electronic components designed for various applications. These models are widely recognized for their reliability and efficiency, making them ideal for a range of consumer and industrial uses.

The Sanyo STB1123C1 stands out with its impressive voltage ratings and high current capabilities. It features a compact design that ensures easy integration into smaller systems while maintaining excellent thermal performance. The device is built using advanced semiconductor technology, allowing it to operate at higher frequencies with reduced power loss.

The STB1010C1 model, meanwhile, is designed for optimal performance in DC-DC converters. It incorporates features that allow for high efficiency and minimal noise during operation. This model also includes built-in protection mechanisms against thermal overload, ensuring long-lasting performance and reliability in demanding environments.

Another noteworthy component is the STB0810C1, which excels in low-power applications. Its compact size and low gate charge make it suitable for battery-operated devices, contributing to improved energy efficiency and extended battery life. This model is particularly appreciated in mobile and portable electronics where power consumption is a critical factor.

The Sanyo STB1023C1 is ideal for switching applications, offering enhanced speed and efficiency. Its rapid switching capabilities allow for reduced signal delays, making it perfect for digital circuits and high-frequency applications. This model's low on-resistance also reduces heat generation during operation, which is crucial for maintaining performance under load.

Lastly, the STB0811C1 is crafted for specific industrial applications, ensuring robust performance in harsh environments. It boasts excellent thermal management features, making it resistant to overheating even under continuous operation. The model is designed to handle substantial power loads, providing stability and reliability in challenging conditions.

All these models share a foundation in Sanyo's commitment to innovation and quality. They incorporate protection features like overcurrent and overload protection, enhancing the safety and longevity of the devices in which they are used. Each model is an example of Sanyo's dedication to delivering high-performance electronic components that meet the diverse needs of modern applications across industries. Their collective characteristics ensure they remain integral to advancing technology in various sectors.