Protocol | The protocol associated with this IP filter. The user may choose |
| between TCP, UDP or Both. |
IP Address | An IP address or range of IP addresses that will be denied |
| access to the Internet. |
Subnet Mask | The subnet mask that corresponds to the IP address above. |
Start Port/End Port | A port or range of ports that will be denied access to the |
| Internet. If no port is entered, all ports in this IP range will be |
| denied access to the Internet. |
| Advanced > Filters > MAC Filters |
All computers are uniquely identified by their MAC (Media Access Control) address. The following window will allow users to deny computers access to the Internet or only allow certain computers access to the Internet, based on their MAC address. To access this screen, click the Advanced tab along the top of the configuration window, then the Filters tab to the left hand side and finally click the corresponding radio button for MAC Filters.
Index | A number used to identify this MAC address filter setting. |
MAC Address | Enter the MAC address to be filtered. |
State | This field allows you to enable or disable this MAC address |
| filter setting. |
40