D-Link DVG-1402S manual Advanced Routing Static Route, Gateway, Interface, Metric

Page 44

Advanced > Routing > Static Route

The Routing table, shown to the right, allows you to enter static routes between computers on both the WAN (Internet) and your LAN.

IP Address

Enter the IP Address of the subnet or device where packets are

 

to be routed.

Subnet Mask

Enter the subnet mask corresponding to the IP address entered

 

above.

Gateway

Enter the IP address of the gateway used for packets that are

 

to be routed to the IP address entered above.

Interface

Select the WAN (Internet) or LAN interface.

Metric

Enter the number of hops (the number of routers) that packets

 

will be allowed to cross when being routed to the IP address

 

entered above.

State

Use this drop-down menu to Enable or Disable this route.

43

Image 44
Contents Link DVG-1402S Contents Page Package Contents Introduction Rear Panel Connections LAN Ports ButtonFront Panel LEDs WAN LEDFeatures Installation For a typical setup at home, please do the followingUsing the Configuration Wizard 192.168.15.1Home WAN DynamicHost Name MAC AddressISP Upstream BandwidthHome WAN Static IP Address Secondary DNS Address Upstream Bandwidth Home WAN PPPoE Secondary DNS Address Upstream Bandwidth Home LAN Subnet MaskHome VoIP Home VoIP Server Configuration Service Domain Timer T2Domain Name PortHome VoIP Provisioning Provisioning FunctionServer URL Proxy AddressPage Home VoIP Stun Configuration Stun StateStun Server Port Stun ReqIntervalHome VoIP User Agent Home VoIP Peer to Peer User IP AddressHome VoIP Telephony Index Dtmf Method Payload TypeHome VoIP Speed Dial Dial CodeHome VoIP Misc Ring on Ring off Home VoIP Misc. Ring CadenceDuration Profile ID Home VoIP Misc. Ring Default RuleRing Cadence Home VoIP Misc. Ring Rule From Port Ring Cadence Profile ID Caller IDPhoneNum Home VoIP Manage Features Reject Incoming CallName Home VoIP Manage Features Block Outgoing Call Home Dhcp Page Home Proxy DNS Advanced Virtual Server Private IP Protocol TypeStart/End Global Port Start/End Local PortAdvanced Filters Advanced Filters IP Filters State ProtocolStart Port/End Port Advanced Firewall Pass or BlockSource DestinationAdvanced Routing RIP Configuration LAN RIPv1LAN RIPv2 WAN RIPv1Advanced Routing Static Route GatewayInterface MetricNAT Function Advanced NAT NAT ConfigurationNAT Interface Netmask Local IP Start/End Advanced NAT Dynamic NATIndex Global IP Start/End Global IP Address Advanced NAT Static NATLocal IP Address Tools Admin Web Port Number WAN Access Control Administrator PasswordTools System Software Update Firmware UpdateTools Firmware File NameTools Snmp Snmp IP Management Address Snmp TrapTools Time Status Device Info WANStatus Stats Status Diagnostics Help Technical Specifications „ Pptp„ WAN Technical Support
Related manuals
Manual 53 pages 38.79 Kb Manual 57 pages 58.51 Kb

DVG-1402S specifications

The D-Link DVG-1402S is a versatile voice gateway designed to empower small to medium-sized businesses with seamless voice over IP (VoIP) communication. This device integrates traditional telephony with modern Internet Protocol (IP) technologies, offering a significant upgrade from conventional phone systems.

One of the main features of the DVG-1402S is its dual functionality as both a VoIP gateway and a router. It enables users to connect standard analog telephones to a VoIP network, thus converting existing telephone systems into a more cost-effective solution. This feature is particularly beneficial for businesses looking to maintain their current telephony setup while transitioning to VoIP.

Equipped with two FXS (Foreign Exchange Subscriber) ports, the DVG-1402S allows connectivity to two analog phones, ensuring that users can make and receive calls through the VoIP service without the need for additional hardware. The device supports a variety of signaling protocols, including SIP (Session Initiation Protocol), enabling compatibility with a wide range of VoIP service providers.

The DVG-1402S also boasts advanced QoS (Quality of Service) features that prioritize voice traffic over data, ensuring clear and uninterrupted voice calls even during peak internet usage. This characteristic is crucial for businesses that rely heavily on VoIP communication, as it enhances call quality and reduces latency.

In addition, the device supports multiple codecs including G.711, G.723, and G.729, providing flexibility in bandwidth usage. Users can select the codec that best fits their internet connection and call quality requirements, optimizing performance based on their specific needs.

The DVG-1402S includes an easy-to-use web-based management interface for configuration and troubleshooting, making it user-friendly for both IT professionals and average users. Furthermore, it features built-in security measures such as encryption and firewall capabilities to protect voice communications from potential threats.

In summary, the D-Link DVG-1402S is a comprehensive VoIP solution that combines functionality, performance, and ease of use. With its ability to integrate with existing telephony systems, support for various protocols and codecs, and advanced QoS features, it stands out as a reliable choice for businesses looking to enhance their communication infrastructure with VoIP technology. Its versatility makes it a valuable asset for any modern office environment.