Festool PN574354 user manual Intended Use, Overview

Page 6

Intended Use

The OF 2200 EB router is designed exclusively for machining of wood, wood-like materials, and plastics. The router may also be used for machining aluminum and plasterboard when an appropriate router bit is installed. All applications beyond this are regarded as improper use. The tool should not be altered or used for any purpose

other than as specified in these operating instructions. Using the tool in contravention to this manual may lead to serious injury and will void your warranty. The user shall be responsible and liable for accidents, injuries, and property damage resulting from misuse or abuse of this tool.

Overview

Item	Name or Description	Ref. Page(s)
A	Guide Rod Clamping Knob	19, 20

B	Guide Rod Eyelet	19, 20

C	Baseplate Release Lever	11

D	Depth Stop Turret	8, 10

E	Turret Latching Lever	8, 10

F	Depth Stop Post	8, 10

G	Depth Stop Locking Lever	8, 10

H	Depth Stop Post Handle	8, 10

I	Fine Adjustment Dial	8, 10

J	Speed Control Dial	7

Item	Name or Description	Ref. Page(s)
K	Ratcheting Spindle Lock	9

L	Collet	9

M	Handle	12

N	Trigger Lock	7

O	Power Trigger	7

P	Dust Shroud Release Lever	7

Q	Dust Shroud	7

R	Plunge Lock Knob	8, 10, 12

S	Dust Collection Port	7

6	OF 2200 EB Router

Image 6

Contents 2200 EB Plunge Router Limited Warranty Contents About This ManualElectrical Safety General Power Tool Safety WarningsWork Area Safety Personal SafetyTechnical Specifications Specific Safety Rules for RoutersRespiratory Exposure Safety Warnings ServiceIntended Use OverviewPower Controls Dust CollectionRouter Speed and Feed Rate Plunge Components Basic Operation Changing Router BitsChanging Collets Setting the Plunge Depth Offset from a SurfaceBy Router Bit Profile Installing Template Guides and Chip Deflector Changing BaseplatesFixed Depth Routing Basic RoutingFeed Direction Rules Push-Cut RoutingFixed Depth Using the Turret Latch Plunge RoutingPlough Cuts Multi-pass Cuts Using a Template GuideAdvanced Routing Techniques Multi-depth PloughingMulti-depth Profiles Multi-position horizontal ProfilesPre-cutting Dovetails and Keyways Hardware Inlay Example using the Turret Latch Precision RoutingChatter Tips for Successful RoutingChipping and Tearout Router ControlWhat is Climb-Cutting Climb-Cut RoutingAccessories Guide Rail AttachmentEdge Forming Setup General SetupEdge Guide Systainer System Container Parts of the SystainerStacking Systainers Troubleshooting SymptomMaintenance Routine Maintenance2200 EB Router