Installation Instructions

US STW PTAC 8/8/01 5:34 PM Page 6

IMPORTANT!

Please Read Before Starting

This air conditioner meets strict safety and operating stan- dards. As the installer or service person, it is an important part of your job to install or service the system so it oper- ates safely and efficiently.

For safe installation and trouble-free operation, you must:

•Carefully read this OWNER’S MANUAL before installa- tion and service.

•Follow each installation or service step exactly as shown.

•Observe all local, state, and national electrical codes.

•Pay close attention to all warning and caution notices given in this manual.

		WARNING				This symbol refers to a hazard or
		WARNING				unsafe practice which can result
						unsafe practice which can result
						in severe personal injury or death.
						This symbol refers to a hazard or


		CAUTION
		CAUTION				unsafe practice which can result
						in personal injury or product or
						property damage.

If Necessary, Get Help

These instructions are all you need for most installation sites and maintenance conditions. If you require help for a special problem, contact our sales/service outlet or your certified dealer for additional instructions.

SPECIAL PRECAUTIONS

When Wiring

ELECTRICAL SHOCK CAN CAUSE SEVERE PERSON- AL INJURY OR DEATH. ONLY A QUALIFIED, EXPERI- ENCED ELECTRICIAN SHOULD ATTEMPT TO WIRE THIS SYSTEM.

•All wiring must conform to local electrical codes.

•Each unit must be properly grounded with a ground (or earth) wire or through the supply wiring.

•DO NOT, under any circumstances, cut or remove the third (ground) prong from the power cord plug.

•Never use an extension cord with this air conditioner.

•DO NOT use a damaged power cord, plug, or wall out- let. Replace them immediately.

•DO NOT change the internal wiring or any part of the system.

•DO NOT turn the air conditioner on and off by plugging and unplugging. Use the Operation switch (SELEC- TOR).

•Follow National Electrical Code (NEC) and local codes, ordinances and regulations. All wiring — including installation of receptacles, must be in accordance with these codes.

•The NEC requires permanent connection for installa- tions over 250 volts.

•Protective devices (fuses or circuit breakers) accept- able for this air conditioner are specified on the name- plate of each unit.

•Aluminum building wiring may pose special problems

—consult a qualified electrician.

When Transporting

Be careful when picking up and moving the air conditioner. Get a partner to help, and bend your knees when lifting to reduce strain on your back. Sharp edges or thin aluminum fins on the air conditioner can cut your fingers.

When Servicing

•Turn the power OFF at the main power box (mains) before opening the unit to check or repair electrical parts and wiring.

•Keep your fingers and clothing away from any moving parts.

•Clean up the site after you finish, remembering to check that no metal scraps or bits of wiring have been left inside the unit being serviced.

Tools Needed

Phillips screwdriver

Flat blade screwdriver

Others

CAUTION

•Before starting the installation, the power to the direct connect wiring should be set to OFF.

•Ventilate any enclosed areas when installing or testing the refrigeration system. Escaped refrigerant gas, on contact with fire or heat, can produce dangerously toxic gas.

•Confirm upon completing installation that no refrigerant gas is leaking. If escaped gas comes in contact with a stove, gas water heater, electric room heater or other heat source, it can produce dangerously toxic gas.

STW-2 specifications

The Sanyo STW-2 is a groundbreaking model in the realm of portable audio equipment, renowned for its innovative features and cutting-edge technologies. As a compact cassette player, the STW-2 reflects the synthesis of audio engineering and user-friendly design, ideal for both casual listeners and audiophiles alike.

One of the main features of the Sanyo STW-2 is its lightweight and portable design, making it easy to carry around without compromising on quality. It is equipped with a high-fidelity audio output, ensuring that users enjoy clear and crisp sound while on the move. The compact dimensions allow it to fit snugly in bags or even pockets, promoting convenience without sacrificing functionality.

The STW-2 also boasts advanced tape management technologies. Its auto-reverse functionality automatically plays both sides of a tape, allowing for uninterrupted listening. This feature saves time and enhances user experience as microphone input capabilities let users record their audio with ease. The built-in microphone, coupled with a simple recording mechanism, makes it great for capturing impromptu moments or memos directly onto a cassette.

In terms of sound characteristics, the Sanyo STW-2 delivers supplementary bass enhancement, ensuring that listeners can enjoy a fuller sound. The equalizer settings also provide the flexibility to adjust the audio output according to personal preference, whether someone is in the mood for pop, rock, or acoustic genres. Additionally, the inclusion of a headphone jack promotes private listening, catering to moments of solitude or essential focus.

Moreover, the STW-2 incorporates a reliable built-in battery that ensures extended playtime, allowing users to enjoy their favorite tapes for hours on end without the worry of running out of power. The easy-to-read interface also caters to quick navigation through tracks, leading to a seamless listening experience.

In conclusion, the Sanyo STW-2 is a remarkable example of portable audio technology, characterized by its robust construction, user-oriented features, and superior audio performance. Its combination of portability, sound quality, and modern record capabilities presents a compelling choice for enthusiasts seeking a nostalgic yet functional audio player. Whether for personal use, casual listening, or creative recording, the STW-2 stands out in its field as a timeless device that maintains its relevance in today's audio landscape.