AIR Louvers, Temperature Limiting

US STW PTAC 8/8/01 5:34 PM Page 9

3)Attach the field-supplied conduit to the bottom plate.

4)Connect the power supply conductors to the Terminal block and the Grounding screw.

5)Attach the cover plate.

Terminal block

Grounding screw

Cover plate

Bottom plate Conduit

6)Reinstall the front grille. (See “Front Grille” on page 3.)

5.AIR LOUVERS

The direction of the heated or cooled air may be adjusted by removing and turning the louvers around.

To change the louver direction, remove the front grille and 2 louver screws that hold the louvers in place. Turn the louver section 180° (end for end), replace the screws and replace the front grille. The textured face of the louver section must be facing toward the room side.

Front grille

Louver screws

6. TEMPERATURE LIMITING

The normal range of the thermostat control is approximately 55°F to 88°F. The control range may be narrowed by the use of the Temperature Limiting screws located behind the control panel.

Repositioning the screw on the left will limit the maximum temperature about 3.7°F for each hole in a clockwise rotation; the screw on the right will limit the minimum temperature when moved counter- clockwise. Limiting the maximum and minimum set- tings prevents users from turning the controls to extreme positions. Restrictions to full rotation of the thermostat knob may require explanation to the room occupant that the unit will provide comfort- able conditions at the settings allowed.

To access the limiting screws, remove the front grille, the thermostat knob and the operation knob by pulling each knob off its shaft and the control panel. (See the illustration “Fan Cycle Switch” on page 4.) Set the limiting screws to the desired set- ting, and replace the control panel and the control knobs. If the settings do not allow sufficient room temperature control, the limiting screws may have to be repositioned.

Stop link

Tapped holes (10)

Thermostat shaft

(Warmest)(Coldest)

Temperature limiting screws (location at shipment)

When the limiting screws are relocated, it is recom- mended that the screws be set no higher than the second hole from the original bottom position. This provides an operating range between approximately 58°F and 80°F. In order to maximize the benefit of the temperature limiting, it may be necessary to adjust the limiting screws seasonally, maintained at moder- ate temperatures (i.e., heating season temperatures limited between 60°F and 75°F; cooling season tem- peratures limited between 85°F and 65°F).

STW-2 specifications

The Sanyo STW-2 is a groundbreaking model in the realm of portable audio equipment, renowned for its innovative features and cutting-edge technologies. As a compact cassette player, the STW-2 reflects the synthesis of audio engineering and user-friendly design, ideal for both casual listeners and audiophiles alike.

One of the main features of the Sanyo STW-2 is its lightweight and portable design, making it easy to carry around without compromising on quality. It is equipped with a high-fidelity audio output, ensuring that users enjoy clear and crisp sound while on the move. The compact dimensions allow it to fit snugly in bags or even pockets, promoting convenience without sacrificing functionality.

The STW-2 also boasts advanced tape management technologies. Its auto-reverse functionality automatically plays both sides of a tape, allowing for uninterrupted listening. This feature saves time and enhances user experience as microphone input capabilities let users record their audio with ease. The built-in microphone, coupled with a simple recording mechanism, makes it great for capturing impromptu moments or memos directly onto a cassette.

In terms of sound characteristics, the Sanyo STW-2 delivers supplementary bass enhancement, ensuring that listeners can enjoy a fuller sound. The equalizer settings also provide the flexibility to adjust the audio output according to personal preference, whether someone is in the mood for pop, rock, or acoustic genres. Additionally, the inclusion of a headphone jack promotes private listening, catering to moments of solitude or essential focus.

Moreover, the STW-2 incorporates a reliable built-in battery that ensures extended playtime, allowing users to enjoy their favorite tapes for hours on end without the worry of running out of power. The easy-to-read interface also caters to quick navigation through tracks, leading to a seamless listening experience.

In conclusion, the Sanyo STW-2 is a remarkable example of portable audio technology, characterized by its robust construction, user-oriented features, and superior audio performance. Its combination of portability, sound quality, and modern record capabilities presents a compelling choice for enthusiasts seeking a nostalgic yet functional audio player. Whether for personal use, casual listening, or creative recording, the STW-2 stands out in its field as a timeless device that maintains its relevance in today's audio landscape.