A2.03 AdTran NetVanta 1355/6355 SIP/TDM/IP Appliance
1Important Notes
∙Check the SIP 3rd Party Validation Website for current validation status. The SIP 3rd Part Validation Website can be viewed at:
∙http://testlab.inin.com or http://testlab.vonexus.com
∙It is recommended to make basic changes to the Interactive Intelligence supplied .cfg file then utilize the command line interface for further configuration. Not all options are exposed using the web interface.
∙As this unit is a critical piece of the SIP infrastructure, it is highly recommended that DHCP not be used. A static IP address is the preferred method and is how the unit was configured during validation.
∙While there are TCP options in the command line, they are not recommended for use by AdTran, and were not tested.
∙T.38 is supported for 4 concurrent faxes on the Digital span only. T.38 is not supported for the FXO spans.
∙When using managed phones the name of the phone in IA must match the extension of the phone. This is required because the phone will use the name in its registration message, and in a standalone failover scenario, the registration name is how the AdTran device will be able to contact the other internal stations. If something else is used, internal stations would not be able to dial other internal stations, because the number dialed would not match the registration entries.
2Vendor Documentation
Documentation can be found on the CD shipped with the AdTran NetVanta 1355/6355, or on the AdTran website http://www.adtran.com.
3 Validated Firmware Version
A2.03.00.SC.E
4 Install
Download the AdTran NetVanta 1355/6355 files from the Interactive Intelligence Testlab website for the AdTran: http://testlab.inin.com/compatibilityfiles_external/production/documents/AdTr anNetVanta.zip
Contained in the zip file will be the validated version of firmware (.biz), as well as any supplemental configuration files, and a set of sample (.cfg) files.