Grizzly VIP-110, VIP-210 Conveyor, Main Specifications Operation Information, Drum Information

Conveyor
Type	TEFC Induction
Horsepower	2 HP
Voltage	220/440V
Prewired	220V
Phase	Three
Amps	6/3A
Speed	1725 RPM
Cycle	60 Hz
Number Of Speeds	Adjustable
Power Transfer	V-Belt to Gearbox
Bearings	Sealed and Lubricated
Main Specifications:
Operation Information
No Of Sanding Drums	1
Maximum Board Width	51 in.
Minimum Board Width	2 in.
Maximum Board Thickness	6 in.
Minimum Board Thickness	3/16 in.
Minimum Board Length	14 in.
Sanding Belt Speed	2200 FPM
Sanding Drums Speed	2200 FPM
Conveyor Feed Rate	14 - 60 FPM
Sanding Belt Length	60 in.
Sanding Belt Width	51 in.
Drum Information
Infeed Sanding Drum Type	Spiral Grooved Rubber
Infeed Sanding Drum Size	4 in.
Outfeed Sanding Drum Type	Steel
Outfeed Sanding Drum Size	3-1/2 in.
Platen Information
Platen Type	Felt
Platen Length	53-1/2 in.
Platen Width	3-1/2 in.
Construction
Conveyor Belt Construction	Rubber
Body Construction	Steel
Base Construction	Steel
Paint	Epoxy
Other Related Information
Floor To Belt Height	34 in.
Belt Tracking	Pneumatic
Sanding Belt Tension	Pneumatic
No Of Pressure Rollers	2
Pressure Roller Type	Rubber
Pressure Roller Size	2 in.
Conveyor Belt Length	78.75 in.
Conveyor Belt Width	51 in.
Belt Roller Size	4 in.
No Of Dust Ports	5
Dust Port Size	4 in.
Air Requirement	75 PSI

Model G9980	The information contained herein is deemed accurate as of 10/7/2008 and represents our most recent product specifications.	PAGE 2 OF 3
	Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.