Global Machinery Company BD1500 manual

c. Disconnect the plug from the power source before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

d. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power

tools are dangerous in the hands of untrained users.

e. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

f. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

g. Use the power tool, accessories and tool bits etc., in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.

5. Service

a. Have your power tool serviced by a qualified repair person using only identical replacement parts. This

will ensure that the safety of the power tool is maintained.

Additional safety rules for belt & disc sanders

WARNING: To avoid mistakes that could cause serious permanent injury, do not plug the sander in until the following steps are completed:

•Assembly and alignment

•Learn the use and function of the On/Off switch, backstop, belt tracking knob, belt tension lever, work table and work table tilt lock knob.

•Review and understand all safety instructions and operating procedures in this manual.

•Read manual before using sander

•Wear safety goggles

•Wear a dust mask

•Maintain 1-2 mm maximum clearance between table and sanding belt and disc

•Always support workpiece with “backstop” or “worktable”

•Avoid “kickback” (workpiece thrown at you). Use only left hand side of disc.

•Avoid fire. Clean out all sawdust and disconnect from any vacuum before sanding metals.

•Always unplug the sander before moving it.

•Put the sander on a firm level surface where there is plenty of room for handling and properly supporting the workpiece.

•Support the sander so it does not rock.

•Bolt the sander to its work surface.

•Never stand on the tool. Serious injury could occur if the tool tips. Do not store anything above or near the tool where anyone might stand on the tool to reach them.

•Check damaged parts, check for alignment of moving parts, binding of moving parts, broken parts, - Do not use sanding belts narrower than 100mm – narrower belts uncover parts that could trap your fingers.

•Remove adjusting keys and wrenches from tool before turning it on.

•Adjust work support to clear the sanding surface by no more than 1-2 mm. When checking clearance between the belt and work support, press the belt flat against the metal beneath it.

•Make sure all clamps and locks are tight and no parts have excessive play.

•Never use the sander near flammable liquids, vapors or gases.

BD1500 specifications

The Global Machinery Company BD1500 represents a significant advancement in the heavy machinery sector, designed for various construction and industrial applications. Renowned for its durability and efficiency, the BD1500 has rapidly become a popular choice among contractors and businesses looking for reliable equipment.

One of the BD1500’s primary features is its robust construction, which is engineered to withstand the rigors of daily use in tough environments. Its frame is made from high-strength steel, ensuring resilience against impacts and harsh weather conditions. This durability allows operators to rely on the BD1500 for extended periods without the frequent maintenance often required by lesser machines.

In terms of performance, the BD1500 is equipped with a powerful engine that delivers exceptional torque and horsepower. This ensures that the machinery can operate effectively across a variety of tasks, from excavation to material handling. The engine is designed with fuel efficiency in mind, helping businesses to minimize operational costs while maximizing productivity.

The BD1500 integrates advanced technologies that enhance its functionality and ease of use. One such technology is the intuitive digital display, which provides real-time feedback on the machine’s performance, fuel levels, and maintenance requirements. This feature enables operators to manage their work more efficiently and reduces downtime caused by unexpected mechanical issues.

Another impressive characteristic of the BD1500 is its versatility. Outfitted with interchangeable attachments, such as buckets, forks, and grapples, the machine can easily adapt to different job requirements. This flexibility makes it an invaluable asset for any construction site, allowing companies to tackle various tasks without the need for multiple pieces of equipment.

Safety is paramount in the design of the BD1500. The machine is built with multiple safety features, including rollover protection structures (ROPS) and seatbelt systems. Additionally, its advanced braking system ensures reliable stopping power, even in challenging conditions, thus safeguarding operators and nearby personnel.

In summary, the Global Machinery Company BD1500 stands out for its powerful performance, robust construction, and advanced technology. With features that enhance operational efficiency and safety, the BD1500 is well-equipped to meet the demands of modern construction and industrial tasks, making it a worthwhile investment for businesses seeking reliable machinery. Efficient, versatile, and safe, the BD1500 embodies the innovation that Global Machinery Company stands for.