Side Table Angle
The side table can be adjusted to accommodate sanding at various angles. To adjust the angle position of the side table:
1. Loosen the lock handle underneath the side table shown in Figure 19.
2. Move the side table to the desired position.
3. While holding the side table in the desired position, tighten the lock handle loosened in Step 1.
Figure 17. Setting miter gauge to 90°.
Side Table Height
The side table can be adjusted to accommodate a wide range of workpieces. To adjust the side table:
1.Loosen the lock handle shown in Figure 18.
2.Move the side table to the desired height.
3.While holding the side table at the desired height, tighten the lock handle loosened in Step 1.
Lock Handle
Figure 18. Lock handle for side table height.
Lock Handle
Figure 19. Lock handle for side table angle.
G9984/G9985 Oscillating Belt Edge Sander |