Unpacking
The Model G9984/G9985 is shipped from the manufacturer in a carefully packed carton. If you discover the machine is damaged after you have signed for delivery, immediately call Customer Service for advice.
The Model G9984/G9985 has two lifting rings located on the top of the access door as shown in Figure 3.
1 of 2 Lifting Rings
Lifting Ring
Locations
Figure 3. Lifting ring.
When using a lifting apparatus to move the machine, always lift from both of these designat- ed rings. Lifting at any other location, or from only one ring at a time, could cause the machine to become unbalanced and tip over. A hydraulic pal- let jack or fork lift can also be used. Damage from improper moving methods may void the warranty.
Failure to lift and move the machine correctly could result in serious personal injury and/or damage to the machine
When the machine is in its final location, replace the lifting rings with the star knobs as shown in Figure 4. Be sure to place the 10mm flat washers and 10mm lock washers on the star knobs thread- ed post before installing. These washers help the star knobs remain secure and protect the finish of the machine.
Figure 4. Star knob installation.
Keep the lifting rings in a safe location where they will not become lost. These rings will need to be
G9984/G9985 Oscillating Belt Edge Sander |