Grizzly G9922 instruction manual Maintenance, General, Sander Tables, Lubrication, Sanding Sleeves

SECTION 6: MAINTENANCE

General

Make a habit of inspecting your sander each time you use it. Check for the following conditions and repair or replace when necessary.

1.Loose mounting bolts.

2.Worn switch.

3.Worn or damaged cords and plugs.

4.Loose Sanding Spindle and Sleeve.

Sander Tables

The working table and other non-painted sur- faces on the Model G9922 should be protected against rust and pitting. Some woodworkers rec- ommend using automotive paste wax on exposed steel and cast iron surfaces. If you use paste wax, make sure that it’s 100% Carnauba wax and does not contain silicone.

Lubrication

Shielded and pre-lubricated ball bearings require no lubrication.

Sanding Sleeves

The spindle accepts 2" x 51⁄2" sanding sleeves. For spindle sanding, we recommend a 100 grit (medium) material for general purpose sanding, a 60 grit (coarse) material for rough work, and a 150 grit (fine) material for finish jobs.

G9922 Oscillating Spindle Sander -11-