Circuit Requirements, 110V Operation Grounding

SECTION 2: CIRCUIT REQUIREMENTS

110V Operation		Grounding

The Model G9922 is wired for 110/120V, single phase operation only. The 1⁄2 HP motor will safely draw 4.5 amps at 110V. If you operate this sander on any circuit that is already close to its capacity, it might blow a fuse or trip a circuit breaker. However, if an unusual load does not exist and a power failure still occurs, contact a qualified electrician or our service department.

Fusing

A 15-amp fuse or circuit breaker should be used when fusing this oscillating spindle sander. Circuits rated any higher are not adequate to pro- tect the wiring.

Equipment returned to us for service that shows evidence of being over-fused will be repaired or replaced totally at the customer’s expense, regardless of the present warranty status.

In the event of an electrical short, grounding reduces the risk of electric shock by providing a path of least resistance to disperse electric cur- rent. This tool is equipped with a power cord hav- ing an equipment-grounding conductor. See Figure 1. The outlet must be properly installed and grounded in accordance with all local codes and ordinances.

This equipment must be grounded. Verify that any existing electrical outlet and circuit you intend to plug into is actually ground- ed. If it is not, it will be necessary to run a separate 12 A.W.G. copper grounding wire from the outlet to a known ground. Under no circumstances should the grounding pin from any three-pronged plug be removed. Serious injury may occur.

Extension Cords

If you find it necessary to use an extension cord with the Model G9922, make sure the cord is rated Hard Service (grade S) or better. Refer to the chart in the standard safety instructions to determine the minimum gauge for the extension cord. The extension cord must also contain a ground wire and plug pin. Always repair or replace extension cords when they become worn or damaged.

Figure 1. Grounded plug configuration.

G9922 Oscillating Spindle Sander

-5-

G9922 specifications

The Grizzly G9922 is an advanced woodworking machine designed for both professional woodworkers and hobbyists who require precision and efficiency in their projects. Known for its robust construction and high-quality performance, the G9922 stands out in the market for several reasons.

One of the main features of the Grizzly G9922 is its powerful motor, which delivers ample torque to handle various materials, including hardwoods and softwoods. This machine ensures smooth cuts and consistent performance, making it suitable for a wide range of applications, from furniture making to cabinetry.

The G9922 is equipped with a solid cast iron bed that enhances stability during operation. This heavy-duty base minimizes vibrations, allowing for greater accuracy in cuts. The machine’s design also incorporates a large table area, which provides ample workspace for larger projects, facilitating ease of use.

Another noteworthy characteristic of the Grizzly G9922 is its versatility. It comes with multiple speed settings, allowing users to adjust the cutting speed based on the specific requirements of their material and project. This flexibility is crucial in achieving optimal results in various woodworking tasks.

In terms of technology, the G9922 features a precision-ground steel cutter head that plays a significant role in ensuring clean and accurate cuts. The cutter head’s design helps in reducing tear-out and ensures a smoother finish, which is essential for high-quality woodworking.

Safety is always a priority in woodworking machinery, and Grizzly has integrated several safety features into the G9922. It includes a built-in blade guard that protects the user from accidental contact with the cutting blade. Additionally, it is designed with an emergency stop button, providing an extra layer of safety during operation.

The Grizzly G9922 also emphasizes user-friendly operation. It features an easy-to-use control panel that allows woodworkers to adjust settings quickly and efficiently. Its compact design means it can fit comfortably in smaller workshops, making it accessible to all users.

In summary, the Grizzly G9922 combines power, precision, and safety, making it an excellent investment for anyone serious about woodworking. Its robust construction, versatile features, and user-friendly design ensure that it meets the diverse needs of woodworkers, contributing to high-quality results in every project.