Grizzly G9956 instruction manual Operations, For manual ON/OFF use

Page 17

SECTION 5: OPERATIONS

Operating this equipment creates the poten- tial for flying debris to cause eye injury. Always wear safety glasses when operating equipment. Everyday glasses or reading glasses only have impact resistant lenses, they are not safety glasses. Be certain the safety glasses you wear meet the appro- priate standards of the American National Standards Institute (ANSI).

Operations that gener- ate large amounts of any kind of dust may warrant the use of a respirator even though the air filter is running. The double air filter is not a substitute for a respirator!

Operations

Operating the G9956 Double Air Filter can be done in two ways. Refer to Figure 6 while follow- ing the instructions below.

For manual ON/OFF use:

1.Connect power to the double air filter.

2.Set the main (red) switch to “No Remote Control.”

3.Pull the switch chain to turn the fan ON and

OFF.

The remote control will not work when the main switch is in this position.

Model G9956 (Mfg. since 12/09)

Figure 6. The air filter control panel. For remote control ON/OFF use:

1.Connect power to the double air filter.

2.Set the main (red) switch to “Remote Control.”

3.Push the ON/HR button on the remote control to turn it on. Push OFF to turn it off.

If the fan does not start when you turn the double air filter ON, turn the switch OFF, disconnect the power and follow these steps:

•Check the breaker/reset switch located next to the start switch and reset if needed.

•Check to make sure the outlet you have plugged the filter into is in working condition. Reset its breaker if needed.

•If you are using a remote control system with this unit, double check main switch setting.

•Check batteries in the remote.

If the double air filter will not operate after the fol- lowing steps, please call customer support lines for more help.

-15-

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Heavy-Duty Double Air Filter Page Table of Contents Safety Instructions for Power Tools Safety25ft 50ft 100ft Length AMP RatingAdditional Safety for Double Air Filters Contact Info General InformationCommentary MACHINe dATA SHeeT Main Specifications Operation Information 110V Operation Circuit RequirementsCircuit Breaker Requirements Plug TypeUnpacking SET UPInventory Hardware Bag Inventory use page 8 to idenHardware Recognition Chart Site Planning Eye Bolts Filter CapacityMounting Preparation Hardware Needed not included Qty Test Run Hanging the FilterTo test run the air filter unit Page For manual ON/OFF use OperationsOperations To set the fan speed Speeds and TimerTo set the fan timer Cleaning the Filters MaintenanceReference Info Aftermarket AccessoriesParts Breakdown Description Parts ListWiring Safety Instructions WiringCAP 20 MFD Run Capacitor Wiring DiagramWarranty and Returns Comments Warranty CardBOX BELLINGHAM, WA Grizzly INDUSTRIAL, INCOrder Hours a DAY
Related manuals
Manual 24 pages 9.39 Kb

G9956 specifications

The Grizzly G9956 is a state-of-the-art milling and drilling machine that seamlessly combines power, precision, and user-friendly features, making it an indispensable tool for both hobbyists and professional machinists. This model is designed specifically for those who require heavy-duty performance without sacrificing accuracy or ease of use.

One of the standout features of the G9956 is its robust construction. The machine is built with a solid cast iron frame, which provides excellent stability and minimizes vibrations during operation. This is particularly important for achieving precise cuts and ensuring a superior finish on various materials, including wood, metal, and plastic. The machine’s weight contributes to its stability, allowing for better control while milling or drilling.

Another notable characteristic is its impressive motor capacity. Equipped with a powerful variable speed 3/4 HP motor, the G9956 can easily handle tough jobs without bogging down. The variable speed control allows users to adjust the RPM settings seamlessly, enabling optimal performance across a range of applications. Users can select lower speeds for drilling and higher speeds for milling, offering flexibility based on specific requirements.

The G9956 also features a spacious worktable with T-slots, allowing for easy clamping of workpieces. The table measures 10 inches by 50 inches, providing ample working space for larger projects. Its tilting capabilities add further versatility, enabling angle milling for complex shapes and ensuring perfect alignment for various tasks.

In terms of safety and convenience, the G9956 is designed with user engagement in mind. It includes an emergency stop button for quick shutdown and an easily accessible control panel, ensuring that operators can make adjustments on the fly without hindrance.

For enhanced precision, the G9956 comes with a digital readout system that displays exact measurements, elevating the accuracy of both milling and drilling operations. The machine also supports a range of attachments and accessories, expanding its capabilities further.

In summary, the Grizzly G9956 is an exceptional milling and drilling machine that stands out due to its powerful motor, stability, versatility, and user-friendly features. It represents a perfect blend of technology and practicality, making it an ideal choice for a wide range of machining tasks. Whether for personal projects or professional use, the G9956 meets the needs of today’s demanding machining environment with excellence.
Top Page Image Contents