MODEL H8120 |
6" RANDOM ORBITAL SANDER |
INSTRUCTION SHEET |
EYE INJURY HAZARD!
Always wear safety glasses when using this tool to prevent serious personal injury.
DUST HAZARD!
Always wear respirator when
using this tool.
INJURY HAZARD!
Always disconnect tool from
air to prevent unexpected 
operation during service.
DO NOT EXCEED 120 PSI! Personal injury could occur.
Product Information
•10,000 RPM
•Requires 90 PSI
•Air Consumption
•Requires 6" hook and loop sanding disc with
•1⁄4" NPT female air inlet
•3⁄4" (ID) dust collection hose
•Weighs 2.53 lbs.
Inventory |
| |
A. | Orbital Sander | 1 |
B. | Dust Collection Hose | 1 |
C. | Dust Collection Bag | 1 |
D. | Wrench | 1 |
E. Pneumatic Tool Oil Bottle | 1 | |
F. | 1/4" NPT Male Plug | 1 |
A |
| B |
F
C
E
D
Figure 1. Model H8120 inventory.
Assembly
1.Install the 1⁄4" NPT male
2.Attach a 6" hook and loop sanding disc to the sanding pad as shown in Figure 2.
Figure 2. Attaching sanding disc.
Copyright © JANUARY, 2007 By Grizzly Industrial, Inc. Revised May, 2009 (tr)
Warning: No portion of this manual may be reproduced in any shape Or form without the written approval of Grizzly Industrial, inc.
#bL8858 printed in CHINA