MAINTENANCE
General
Regular periodic maintenance on your Model H3120 Palm Sander will ensure its optimum performance. Make a habit of inspecting your sander each time you use it. Check for the following conditions and repair or replace when necessary:
1.Loose fasteners.
2.Worn switch.
3.Worn or damaged cords and plugs.
4.Worn or damaged sanding pad.
5.Any other condition that could hamper the safe operation of this machine.
Keeping Tool Clean
Your Model H3120 Palm Sander will give you years of trouble free service if you keep it clean and free of
glasses when cleaning tool with com- pressed air.
Plastic parts can easily be cleaned with a damp cloth, but never use water to clean any electrical parts. Solvents should also be avoided on plastic because of the pos- sibility of damage.
If possible, use a scraper to remove glue or sap from your work; these elements may hinder the effectiveness of the abra- sive sheets and cause unnecessary build- up of grime on the sander.
Repair and Service
All quality tools will eventually wear from normal use. Since this sander is encased in an insulated plastic cover, leave repair and service issues to a qualified service technician. This includes brush replace- ment, lubrication or any other internal operation.
Disassembly and improper reassem- bly of this device can result in elec- trical shock danger. Always have this device serviced by a qualified electri- cal repair technician. Serious injury will result.
For replacement parts, find the part you are looking for below and phone (570) 546- 9663.
REF PART# DESCRIPTION
1PH312001 MOTOR BRUSH
2PH312002 SWITCH
3PH312003 HOOK & LOOP PAD
4PH312004 DUST BAG
5PH312005 VACUUM ADAPTER
6PH312006 CARRYING CASE
3
2 | 4 |
|
1 | 5 |
|
6
H3120 Palm Sander |