Grizzly G1183/G1276 instruction manual Assembly Basics, Belt Table

Page 12

SECTION 4: ASSEMBLY

Assembly Basics

Most of your Combination Sander has been assembled at the factory. There are several sim- ple steps to follow to complete the assembly.

A few common tools will be required for assem- bly: Screwdrivers - medium and large straight blade or Phillips®, Allen® wrenches - 2mm, 3mm, 6mm and open end wrenches - 8mm and 10mm.

Belt Table

The belt table adjusts to allow you to sand your work at angles from -30° up to 45°. To make assembly easier, we recommend you mount the Combination Sander on a table or bench before assembling. Four bolt holes are included on the sander’s base for mounting.

To attach the belt table:

1.Swing the belt assembly to its vertical posi- tion by loosening the 6mm Allen® capscrew shown in Figure 4. Tighten capscrew to hold the belt assembly in this position.

2.Remove the lock handle assembly and the threaded stud from the belt housing using a large flat bladed screwdriver.

3.Line up the belt table trunnion with the slot in the belt assembly bracket. Reinstall the threaded stud, then install the flat washer, toothed nut, lock handle, lock washer and bolt, as shown in Figure 5. Make sure the handle is installed so the table can be loos- ened and tightened without interfering with other components. The belt table’s tight fit is deliberate. Placing the table in position is easier if you swing the belt table so the 45° positive stop bolt is located over the gap in the motor casting cover.

-10-

Figure 4. Attaching belt table.

Figure 5. Installing lock handle.

G1183/1276 Combination Sander

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Combination Sander Page Table of Contents Safety Safety Instructions For Power ToolsLength AMP Rating Additional Safety Instructions For The Sander Fusing Circuit Requirements110/220V Operation Grounding Extension Cords Wiring Diagram General Information CommentaryUnpacking Piece InventoryClean Up Site ConsiderationsAssembly Assembly BasicsBelt Table Disc Table Belt Lever Attaching belt leverAdjustments TablesPositive Stops To Adjust the Disc Table Positive Stops Belt PlatenDisc Guard Belt Arm MovementBelt Installation Belt TrackingG1183/1276 Combination Sander Operations Table TiltDisc Sanding Surface SandingBevel Sanding Miter Sanding Bevel sandingMaintenance GeneralTablesG1183/1276 Combination Sander Closure G1183/1276 Combination Sander Machine Data Sheet Grizzly Model G1183 Combination SanderGrizzly Model G1276 Combination Sander Main Unit Parts Diagram Parts List REF# PART# DescriptionG1183/1276 Combination Sander Motor Unit Parts Diagram Warranty and Returns Warranty Card CUT Along Dotted LineGrizzly INDUSTRIAL, INC

G1183/G1276 specifications

The Grizzly G1183/G1276 is a versatile wood lathe designed for both amateur woodworkers and seasoned professionals. Renowned for its robust construction and precise performance, it has gained popularity in the woodworking community for its ability to create intricate designs and projects with ease.

One of the core features of the G1183/G1276 is its powerful motor. This lathe is equipped with a heavy-duty 1 HP motor, delivering consistent torque and stability during operation. The variable speed control allows users to adjust the rotational speed from 600 to 3200 RPM, making it suitable for a wide array of turning tasks, from roughing out large bowl shapes to delicate detail work on smaller spindle projects.

The cast iron bed of the lathe ensures durability and reduces vibration, which enhances accuracy during turning. The sturdy base and robust construction provide a solid foundation, allowing woodworkers to work with confidence, even with larger pieces of wood. Additionally, the overall design promotes user-friendly operation, making setup and adjustments straightforward.

Another notable technological advancement in the Grizzly G1183/G1276 is the self-ejecting tailstock. This feature allows for quick and easy removal of the workpiece, minimizing downtime and streamlining the workflow. The tailstock also includes a 2-inch diameter quill, with a travel of 3 inches, facilitating smooth transitions during different stages of turning.

For enhanced versatility, the G1183/G1276 offers an array of accessories, including different size chisels, faceplates, and tool rests. The quick-change tool post allows users to switch tools efficiently, improving productivity as woodworkers can transition seamlessly between various turning tasks.

User experience is further improved with the integrated digital RPM readout, providing real-time feedback on speed settings. This feature helps to maintain optimal speeds for different materials, reducing the risk of overheating or damaging the workpiece.

Overall, the Grizzly G1183/G1276 wood lathe stands out due to its combination of power, stability, and user-friendly features. Whether you're crafting fine furniture or artistic pieces, its quality construction and advanced technology make it an exceptional tool for any woodturning project. Its commitment to precision, durability, and performance makes the G1183/G1276 a worthwhile investment for any woodworking enthusiast.
Top Page Image Contents