Grizzly G1183/G1276 instruction manual Belt Platen, To Adjust the Disc Table Positive Stops

Page 15

6.Repeat this procedure with the 45° stop. You’ll need a known 45° angle, such as a speed square or the head of a combination square to check accuracy.

Figure 10. Adjusting belt table stops.

To Adjust the Disc Table Positive Stops:

1.Loosen both star knobs.

2.Flip block over table.

3.Loosen check nut.

4.Place accurate square on table and against disc as shown in Figure 11.

5.Make fine adjustments by turning the setscrew in or out. Secure the checknut.

Figure 11. Adjusting disc table stops.

G1183/1276 Combination Sander

Belt Platen

The belt platen should be adjusted out far enough so it is flush with, or slightly higher than the upper roller. The rollers are slightly crowned, that is they are higher in the center than at the edges. This crowning helps the belt to stay centralized on the rollers. The adjustment of the platen to the roller should be done at the high point, or center, of the roller.

1.Loosen the cap screw on the side of the belt housing with a 6mm Allen® wrench. This frees the in and out movement of the belt platen

2.Use a straightedge positioned in the center of the platen which extends over the upper roller. Adjust the belt platen in and out until the straightedge is just barely lifted off of the idler roller.

3.Tighten cap screw.

See the section on Belt Installation/Tracking for more information on adjusting the rollers for prop- er tracking.

DO NOT attempt to operate this machine before completing the assembly and adjust- ment instructions. Be sure that the switch is off and the cord is disconnected from the power source at all times until assembly and adjustment are complete and you have reviewed all safety guidelines. Serious injury could occur.

-13-

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Combination Sander Page Table of Contents Safety Instructions For Power Tools SafetyLength AMP Rating Additional Safety Instructions For The Sander Fusing Circuit Requirements110/220V Operation Grounding Extension Cords Wiring Diagram Commentary General InformationPiece Inventory UnpackingSite Considerations Clean UpAssembly Assembly BasicsBelt Table Attaching belt lever Disc Table Belt LeverAdjustments TablesPositive Stops Belt Platen To Adjust the Disc Table Positive StopsBelt Arm Movement Disc GuardBelt Tracking Belt InstallationG1183/1276 Combination Sander Table Tilt OperationsSurface Sanding Disc SandingBevel sanding Bevel Sanding Miter SandingGeneralTables MaintenanceG1183/1276 Combination Sander Closure G1183/1276 Combination Sander Grizzly Model G1183 Combination Sander Machine Data SheetGrizzly Model G1276 Combination Sander Main Unit Parts Diagram REF# PART# Description Parts ListG1183/1276 Combination Sander Motor Unit Parts Diagram Warranty and Returns CUT Along Dotted Line Warranty CardGrizzly INDUSTRIAL, INC

G1183/G1276 specifications

The Grizzly G1183/G1276 is a versatile wood lathe designed for both amateur woodworkers and seasoned professionals. Renowned for its robust construction and precise performance, it has gained popularity in the woodworking community for its ability to create intricate designs and projects with ease.

One of the core features of the G1183/G1276 is its powerful motor. This lathe is equipped with a heavy-duty 1 HP motor, delivering consistent torque and stability during operation. The variable speed control allows users to adjust the rotational speed from 600 to 3200 RPM, making it suitable for a wide array of turning tasks, from roughing out large bowl shapes to delicate detail work on smaller spindle projects.

The cast iron bed of the lathe ensures durability and reduces vibration, which enhances accuracy during turning. The sturdy base and robust construction provide a solid foundation, allowing woodworkers to work with confidence, even with larger pieces of wood. Additionally, the overall design promotes user-friendly operation, making setup and adjustments straightforward.

Another notable technological advancement in the Grizzly G1183/G1276 is the self-ejecting tailstock. This feature allows for quick and easy removal of the workpiece, minimizing downtime and streamlining the workflow. The tailstock also includes a 2-inch diameter quill, with a travel of 3 inches, facilitating smooth transitions during different stages of turning.

For enhanced versatility, the G1183/G1276 offers an array of accessories, including different size chisels, faceplates, and tool rests. The quick-change tool post allows users to switch tools efficiently, improving productivity as woodworkers can transition seamlessly between various turning tasks.

User experience is further improved with the integrated digital RPM readout, providing real-time feedback on speed settings. This feature helps to maintain optimal speeds for different materials, reducing the risk of overheating or damaging the workpiece.

Overall, the Grizzly G1183/G1276 wood lathe stands out due to its combination of power, stability, and user-friendly features. Whether you're crafting fine furniture or artistic pieces, its quality construction and advanced technology make it an exceptional tool for any woodturning project. Its commitment to precision, durability, and performance makes the G1183/G1276 a worthwhile investment for any woodworking enthusiast.
Top Page Image Contents