MODEL G1970/G1971/G1972 |
PNEUMATIC SANDING |
DRUM FOR BUFFERS |
INSTRUCTIONS |
Specifications |
|
| Bore Diameter | 1" | ||
EYE INJURY HAZARD! | Length | 6" | |||
Always wear safety glasses | Diameter: |
|
| ||
during | use to prevent |
| G1970 | 3" | |
serious personal injury. |
| G1971 | 4" | ||
|
|
| G1972 | 6" | |
10 PSI MAX AIR PRESSURE! |
|
|
|
| |
Exceeding this PSI may | Air Inlet Type | Schrader Valve | |||
result in injury/tool damage. | Maximum Pressure | 10 PSI | |||
Use manual pump only! | Inflation Method | Manual Pump Only | |||
RESPIRATORY HAZARD! |
|
|
|
| |
Sanding | produces fine | Inventory |
|
| |
dust. Wear the appropriate | A. | Pneumatic Sanding Drum | .......................... 1 | ||
protection during use! |
|
|
|
| |
|
| B. | Sanding Sleeve | 1 | |
Functional Overview
A pneumatic sanding drum mounted to a buffer allows for easy and smooth sanding of contours and curves.
The inflatable bladder provides for easy changes of the replaceable sanding sleeve and also allows for
By increasing the pressure in the drum, a user can create a more rigid surface for sanding shal- low contours. Similarly, by decreasing the pres- sure, a user can soften the surface of the drum, allowing it to
Completely releasing the pressure decreases the diameter of the drum so the sanding sleeve can be removed and replaced.
A
B
Figure 1. Model G1972.
COPYRIGHT © MARCH, 2008 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#JB10527 PRINTED IN TAIWAN